Honeywell 47160307 18/8 Solid CL2(PVC)Tstat 250FT 18/8 Solid CL2(PVC)Tstat 250FT

18/8 Solid CL2(PVC)Tstat 250FT

18/8 Solid CL2(PVC)Tstat 250FT

The Honeywell 18/8 Solid CL2(PVC)Tstat 250FT has a rating of 2.1 and covers up to 50 feet. It is a part of the Top Connect Tstat (top connect – load balancing). Its termination is J-box, SJTW, SJTW 6 ft, and 4 conductor. It has a power of 40W; voltage of 120V; and current of 20 Amps. The temperature range is 66 ~ 32 Deg F (19 ~ 0 DegC). Also listed as part of the top connect T-stat family, this product comes with a one year warranty at

This solid CL2(PVC)Tstat 250FT with 18/8" thread is very heavy duty. It has a bare wire lead with a 2 pin plug already attached and ready to install. This Tstat is great for RV's, tractors, trailers and other applications that require high temperatures. The body of this Tstat is made out of thick metal that will not warp in the heat or come loose from the wall.

The Honeywell 18/8 Solid CL2(PVC)Tstat is designed to be installed in forced air heating systems. The product is an indirect, non-vented heat only device and features a NEMA 4X stainless steel enclosure. It has an adjustable temperature range of 50°F to 100°F and a resistance of 1.0 ohms between terminals.

The Honeywell 18/8 inch CL2 (PVC) Tstat 250ft may be used on gas or oil-fired water and space heating systems. The larger case size is b 3/4 inches long, 2 3/16 inches wide, 15 3/16 inches high at the back cover and 11 7/8 inches high at the front cover. To calculate the tstat size needed there are two sets of sizing charts to be used; one for gas heaters and one for oil heaters. The following chart gives the details of the different tstat models that can be ordered for use with oil heaters

CL2PVC 250FT 30Amp/125Vac 18/8 Solid Copper W/White Dial, Not for use with Central Air Conditioning Systems

Honeywell T Stat for 2 wire 208/230V motor and central air conditioning.