24V, 60 HZ, 6 LEADWIRES. 7/8 SLOTTED WIRING H OLE.
This line of Fan Coil Valve Actuator is a designed for use with single stage Toro and most 2 stage Honeywell fan coil valve terminals. The 24V, 60HZ, 6 lead wires has 7/8 slotted wiring holes. It has a 1/2 NPT inlet and outlet.
The Honeywell 67143 Fan Coil Actuator solves low and/or high pressure fan coil problems by replacing the defective 3-way valve with a single-fitting solution. It is designed for use with virtually all 24V, 60 Hz, split system fans that have 6 or 7 leads. The Honeywell 67143 Fan Coil Actuator is suitable for ceiling mounted units, floor mounted units, wall mounted units and air handlers.
The Honeywell 67143 VU443 and VU444 6-lead wiring sockets provide flexibility of installation. Designed for greater durability, the actuator is manufactured with copper windings on a precision wound steel spindle. Superior coil design is a feature that provides optimum electrical contact resulting in minimum latency.
VU443, VU444, VU843 VU844 Fan Coil Valve Actuator. These Fan Coil Valve Actuators are the round style and have a small water reservoir (about 1/3 cup) to act as a pressure equalizer for the incoming gas line.
The VU443 and VU444 4-way, 5-position Fan Coil valve is designed for use with thermal or hydronic fan coils. It has a spool position between Low (L) and Medium (M). The VU843 and VU844 4-way, 6-position Fan Coil valve is designed for use with thermal or hydronic fan coils. It has a spool position between Low (L) and Medium (M), plus the added feature of a Hi/Spd position. They are available in Normally Closed (NC) or Normally Open (NO) configurations.
The Honeywell 67143 VU443, VU444, VU843, VU844 Fan Coil Valve Actuator is the original product that was designed by the industry leader in controls. It is designed to fit more applications than any other valve in the industry.
Our VU443, VU444, VU843 are obsolete controls and will be replaced by the new Honeywell 67143.