Honeywell C7021B2005 , Inc. 10K ohm NTC Duct Temperature Sensor, 6 in., Operating range -40-250F

"6"" DUCT W/ WIRING ENCL 10K OHM"

The C7021B2005 is a 6" duct mounted NTC thermistor with 2-wire hook up. The Inc. series thermistor has a 10K ohm resistance at 77 F, which allows for tighter temperature regulation.

This ceiling duct temperature sensor is a temperature measurement device designed to provide accurate temperature readings in heating and cooling systems installed in HVAC equipment or ducts. This device was designed and manufactured to meet the ASHRAE class 1 requirements for platinum RTD temperature sensors. The NTC is made of platinum dipped nichrome wire and measures 6" (152mm) in length with a wire diameter of 0.20mm and data sheet resistance of 10,000 ohm at 25°C (77°F). The sensor contains a 3/8'' fixed flange on the terminal end and can be installed between -

This Honeywell sensor measures temperature in the duct. The wire is 6"" and it has a 1/2"" diameter.

The industrial quality Honeywell NTC Duct Temperature Sensor is specially designed for HVAC applications. This sensor comes equipped with a 6"" flexible metal duct, operating range of -40-250F, and has an accuracy of +/- 2% over the entire operating range. This sensor can read air temperature through most building materials, including aluminum foil.

The Honeywell C7021B2005 is a duct temperature sensor, offers various miscellaneous measurements for HVAC environments. This sensor features a steel construction with an operating range of -40 to 250°F (-40 to 121°C). The Honeywell C7021B2005 is specifically known for its durability and reliability.

The C7021B2005 is an NTC 10K ohm thermistor for use with a variety of temperature controller and cabinet door applications. It measures 6 inches in length (15.24 cm) and is 3/32 inch in diameter (0.092 cm).

Low-cost, general purpose sensor for measuring air temperature. Features a molded ABS thermopile housing, stainless steel sensing element, 14"" (355mm) of wire and a 6"" (152mm) long lead wire with No. 18 AWG stranded tinned copper leads and a No. 18 spade lug connector.