Honeywell C7023B2013 , Inc. 10K ohm NTC Type III Duct Temperature Sensor, 12 in.Operating range -40-250F

"12"" DUCT MNT SENS 10K OHMS"

The Honeywell L8500M221B002 5/8"" DUCT MOUNT SENSOR -40 to 250 F has an operating range of -40 to 250 F and a sensing element resistance of 10 kOhms.

At 12 inches, this duct mount temperature sensor will help you monitor the temperature of your heating or cooling system. It can be used with boilers and furnaces, as well as central air conditioning units, to measure the internal temperature and thus verify that the system is working properly. It comes with an NTC thermistor resistance of 10K Ohms and a metal mounting flange that can be attached to a duct surface. Wire leads are also included for connecting to the heating or cooling system directly.

Temp Sensors  are used in numerous applications including heating, cooling, ventilation and air conditioning systems. These 10K Ohm NTC type temperature sensors, Part No. T81-1122-1302-01, are designed for measuring temperature in ductwork. They come complete with 1/4 in. tapered connecting leads that are red and black stranded wire with a diameter of 14 AWG.

Sensor, NTC 10K ohm/+125-0F, 0.8" -12/-250F, 3 wire Lead, For air flow/temp measure., FS#:10K, Leads made of ni plated steel in a U shape

keep the temperature of your ducts steady so you can focus on more important things. this honeywell ntc duct temperature sensor senses temperature and sends a proportional 4-20ma dc signal to your microprocessor controls or contactor drive. reliable performance is assured through use of an epoxy-sealed stainless steel sheath and a protective brass tube within the epoxy.

This sensor provides a linear relationship between temperature and resistance. It is designed for use in duct bank temperature measurement systems. Three wire design, Voltage-Divided Design allows for easy installation. Temperature range -40 to 250 degrees Fahrenheit (-40 to 121 degrees Celsius).

This duct sensor applies to Merv 8-10 & ASHRAE test procedures. It is designed for measuring low temperature of forced air distribution systems in residential, commercial and industrial heating/cooling conditioning systems.