Honeywell C7770A1040 "6""DuctMtProbe20kNTC "6""DuctMtProbe20kNTC

"6""DuctMtProbe20kNTC

The "6""DuctMtProbe20kNTC provides an efficient method for measuring indoor temperatures. It measures the actual temperature in multiple ducts at different distances from the supply and extract fans. The probe features a 20 ft (6m) cable and a NTC thermistor. The integrated, parallel-wired 4 ~ 20 mA output signal can be used to power external signaling devices or control system automation.

6" DuctMtProbe. Direct product benefits: Increases thermal transfer performance in ducting systems by 10% (as compared to the standard probe listed above). A magnetic tip that doubles as a pocket clip makes it easy to attach the probe to the grille of portable instruments and record data while the system is running. This DuctMtProbe20kNTC has a tip made of special nickel/iron material for high-temperature service. Radiation protection is required when operating this probe at temperatures above 1500°F (815°C).

The DuctMtProbe20kNTC is ecoHVACR™ certification designed for the residential HVAC market as well as commercial refrigeration applications. It is a combination thermocouple and thermistor probe, which provides a simple and easy-to-use way to measure temperature in air ducts with probes depths up to 20 feet.

The HONEYWELL 6? DUCT MT PROBE provides safety to the user when testing large duct systems for fires and dangerous gases. The 20kN (4200) NTC thermocouple detects temperatures, which are then displayed on a digital screen. The 5 lbs. probe makes this product perfect to test large widths of ductwork that would normally be unsafe or impossible to do so by hand.

A20K Hanging Mount Probe for the DuctMt Pro Controller (C7770 or C7000). This 20k NTC probe detects temperature and humidity in duct systems. 20,000 No-Go Tester.

This flexible duct mount sensor was designed for use in HVAC applications where temperature measurements are needed up to 20,000 NTC. It can be used on both horizontal and vertical runs of ducts, and is also suitable for use in a cold-seal test assembly or flow hood. The sensor has a maximum sensing distance of 6"" from the heating element and an operating temperature range of -40°C to 303°C. A 5' cable length comes standard with the sensor.

This 20kN, 2-wire duct mount probe is a great tool to use in order to ensure that airflow isn't blocked, or only reduced by a small amount.