Honeywell, Inc. MP953C1018 Pneumatic Coil Valve Actuator Low Force 3/4 in stroke 8-12 psi spring range

VALVE ACTUATOR 5" DIAPHRAGM DA 8-12 PSI

This 5 in long Series 1000 Diaphragm Actuator has a force range of 8-12 psi or 3/4 in stroke with no load. The maximum speed at 2.3 ipsec is 1080 psi and the shut off pressure is 2 psi.

The MP953C1018 pneumatic coil valve actuator is ideal for many applications such as tank, gas, water, air, steam and lubricant metering. Use with an 8-12 psi spring to provide a smooth low force 3/4" stroke. Tough ABS tank and diaphragm make this series 6 times more impact resistant than conventional units. This device measures 5 in in height by 1-3/16 in diameter and has a stainless steel shaft. The MP953C1018 actuator requires a 5/8-18 female threaded inlet port, and is recommended for use with a

Extra heavy duty pneumatic actuator offers 3/4" stroke in rugged diaphragm design. Teflon® lubricated guide provides fast, positive guidance. 8-12 psi spring range. Stainless steel shaft and lead screw for corrosion resistance. NPT models have union fitting for remote coil connection (sold separately). 3-wire cable standard, 4 wires on request.

HONEYWELL VALVE ACTUATOR - PNEUMATIC COIL; MODEL: MP953C1018; FOR USE WITH: MANUALLY OPERATED, PRESSURE-SENSING REGULATORS; GAS SERVICE: SINGLE INPUT, DUAL OUTPUT; VACUUM SERVICE: SINGLE INPUT, DUAL OUTPUT; SPRING RANGE (PSI): 8 TO 12; FORCE: 3/4 INCH 14.2 X 5.2 CM

The 953 Air Conditioner Control Valve Actuator is a cast aluminum pneumatic diaphragm actuator that strikes the valve stem of electric or gas furnace remote controls and air conditioner control valves. This valve actuators can handle up to .25 inch actuation stroke.

This pneumatic coil valve actuator features low force throughout the spring range. It is ideal for applications such as water supply, buildings requiring zone control, and agricultural applications. With a 3/4 in stroke (180.3 mm), this actuator features 90 deg air escapes, and 5 in (127.0 mm) air intakes.

The Honeywell 1018 series valve actuators are coil spring and diaphragm types, ideally adapted for a wide variety of applications requiring low force.