Honeywell L4008A1130 High Limit Aquastat Controller with reset button - open view - /U L4008-3

REMOTE BULB AQUASTAT(130-270F 5-30F

Remote bulb aquastat controls hot water or steam valves. Protects the equipment from overheating and possible catastrophic damage to a steam boiler system. For boilers with steam temperature exceeding 410 F, select a high limit control in accordance with ASME Code Section VIII, Rule 3. This protection device is suitable for installation on the steam pipe with Remote bulb aquastat (130-270F 5-30F).

The Honeywell L4008A1130 aquastat provides local control over a heat-sensitive loads in your application. The sensor is directly connected to the aquastat, so there is no loss of signal. This model comes with both wire leads and lug connectors. Instant notification if temperature exceeds 150F. The reset button allows instantaneous resetting of the tripping mechanism when there is a temporary nuisance go signal. 1, 3, 5, & 10MPH adjustable trip points let you customize for your particular application.

The L4008A is a fully waterproof, external temperature switch, providing protection for electric space heating and hot water systems. Spring-operated bails or levers open and close the contacts. The L4008A has a large dial range of 130°F to 270°F (54°C to 132°C) . Its special feature is its isolated case that allows it to be used in extremely dry areas - up to 30% relative humidity. This makes it particularly suitable for use with dehumidifiers. Constructed of sturdy, electrically-conductive molded plastic, the L4008A will provide years

Keep a close eye on water temperature in your hydronic heating system with this Honeywell Aquastat. The remote probe keeps track of temperature, and the open view thermometer ensures that the temperature is visible from a distance.

The L4008-3 is a remote cut-out type temperature controller used to control the operation of a low-voltage, medium or high power submersible well pump and water heater. The L4008/L4009 series of aquastats are designed for commercial and industrial applications. This aquastat is approved by the Federal Trade Commission as a safety device for controlling submersible pumps.

The Honeywell L4008A1130 High Limit Aquastat Controller with reset button is a new product designed to fit an existing hole on a digital Honeywell L4008-3 Thermostat. It is used to turn on the heating or cooling system once the room temperature reaches 130°F. The reset button allows the controller to start up and shut down with each cycle of the heating/cooling system, which enables the product to regulate proper temperatures.

L4008A1130 is a Honeywell High Limit Aquastat for use with heating and outdoor accessories. It is suitable for low to medium heat outputs, with 90-250VAC supply voltage, and has a maximum temperature of 285° F. The reset button can be useful in the event of accidental over-load.