Honeywell 12315 Freeze Stat, 15 Degree F to 55 Degree F Range, 2 SPST (One NO, One NC), 20' Capillary, 5 Degree F Differential, Manual Reset.

HONEYWELL L482A1004 REFRIGERATION CONTROLLER 2 SETS CONTACTS 1 NORM OPEN 1 NORM CLOSED.. ELECTRIC 15-55 RANGE DIFF 10F

Take control and regulate the temperature in your refrigerator or freezer with the help of this Honeywell L482A1004 Refrigeration Controller. With it, you can ensure that food is maintained at safe temperatures, while also preserving energy. The controller comes equipped with two sets of contacts, one of which has a normal open position and one with a normal closed position. It operates at a stan-dard voltage of 120 volts and includes an operating range of 15 to 55 degrees Fahrenheit. A manual

Honeywell Freeze Stat Controller, L481A1004 P/N: 12315. Open and closed contact ranges of 15 to 55 degrees F in a 5 degree differential. Honeywell part number L481A1004. Capillary contacts.

The logic of Honeywell's L482A1004 Freeze Stat is easy to use, so you can focus on tasks that reward your time and effort. The L482A1004 was designed for easy installation and does not require an external heat sink. It features a 2 SPST (one NO, one NC) contact with 5 degree F differential and a 20' capillary. It is good for heating or cooling systems up to 1-1/2 tons and has a range from 15 to

The Honeywell L482A1004 has two inputs and two outputs with manual reset. It is designed to control both heating and cooling systems. It has three ranges for heating type: 15-50F, 50-90F, or 90-135F. This temperature controller has 2 independent programs which are wired differently and can be used separately from each other. The HVAC temperature controller ensures that there is no condensation on your system and this condition will not happen during a power outage situation

Honeywell Freeze-Stat control is a refrigeration control designed for use as a condensing unit controller. It includes one normally open and one normally closed set of contacts that will operate on 20 ft of capillary tube with a 5F drop at 20F ambient temperatures and an outlet temperature range of 55 to 15F. Can be reset by hand or automatically through a thermostat linkage for repetitive cycles. The freeze stat is electronic and does not include printed circuit board, it mounts directly to the cooling

The L482A1004 has been designed for furnaces with single stage, modulating or two stage and fan forced heating systems. It will provide excellent electric heat control by automatically switching on the electric heat system when the indoor temperature drops to a pre-set level. The Honeywell freezing stat will automatically switch the electric heat on within 2.5 degrees of your preset temperature setting. When the ambient air temperature rises past the set-point setting, and the operating mode is at fan, lockout,

The Honeywell 12315 Freeze Stat uses capillary tube technology to continuously monitor the outdoor ambient air temperature of a refrigeration system. When the outdoor air temperature falls below 55°F, or rises above 15°F, it activates the compressor until the safe zone is reached. This thermometer must be used with a Honeywell L482A Compressor Controller or a compatible controller.