Honeywell M4185E4014 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U M7285C-c2

120vS/R MOTOR 60LB-IN W/ AUXSW

MOTOR 60LB-IN (2.5KW) SPRING RETURN AND NON-SPRING RETURN, JUNCTION BOX, CORD CONNECTOR & TERMINALS AND 200 GAUGE MALE CORD SET

This M4185 series direct-drive, brushless ECM electronically commutated motor is a 16 frame size, 1-inch shaft diameter motor. The 60 lb-in torque, 120 volt, S/R motor has a Modutrol magnetic field strength of 835 gauss. The motor's design provides a constant field density with increasing RPM; the linear and constant back EMF characteristics result in long operating life due to minimal field weakening.

The Series 2 Motor-Spring Return and Non-Spring Return w/ Aux Switch, by Honeywell, M4185E4014; are designed for both lift and tilt applications. The control family is compactly designed for easy installation in standard or retrofit applications.

If you are in the market for a motor that not only meets, but exceeds, your needs look no further. The Honeywell M4185E4018 Series 2 Modutrol Motor-Spring Return And Non-Spring Return - U Motor (M7285C-C2) has been engineered to meet strict quality and performance standards; this motor is backed by an industry leading 3YR limited warranty. Our 3YR limited warranty is one of the best in the business and demonstrates our confidence in this motor.

The M4185E4014 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U are designed for use with Dura-Fan, Caframo Ecofan, Eco-Flex, Fan-Tastic and other 8" diameter ceiling fans and accessories.

MOTOR, Spring Return, Two Conductor 120 Volts / 277 Volts AC 25 HZ PTC Thermostat .

The M4185E4014 is a 12/16/20 amp rated DC permanent split capacitor induction motor with one-piece steel frame, five sided brass bushing and ball bearings. Ratings are at 208/277 volt AC single phase with a 6:1 step down ratio. The cover is an extruded aluminum cast housing with four corners that are anchored to the frame by four bolt brackets. The M7285C-C2 is a range extender kit which allows this electronic control to operate two separate motors with multiple speed ranges using on board instructions.