24V Non-Spring Return Foot Mounted Actuator with 3
The Modutrol Series M6194B1011 Foot Mounted Actuator is a 24V Non-Spring Return electrically operated actuator. The M7285C-c2 mounting kit is an accessory to the actuator used for in-wall mounting.
Streamline your installation with this series of non-spring return foot motor-actuators for use on sliding door and glass partition applications. Offering the convenience of a foot mounted actuator, it has 2 spring return /U models, 1 speed push button (with 4-20mA output), lockable limit switches (NC, NO contact), and a visible position feedback. Comes complete with all wiring and hardware necessary for installation in most commercial/industrial and residential sliding doors.
With a full line of motor-spring return and non-spring return foot mount actuators, Honeywell has the perfect solution for your access control project. Non-Spring Return (NSR) actuators recover energy from a door that is being opened, while Spring Return (SR) actuators absorb the energy of a closing door to close it. Both styles reduce or eliminate manual manipulation of doors or gates making them safer for children and those with disabilities. These motors are constructed in an explosion proof case making them ideal for use in hazardous locations. All come with a full 10 year manufacturer's warranty and are RoHS and RE
Honeywell's M6194 Series Modutrol® foot mounted non-spring return actuators are direct replacements for the Eaton-Fuller 2RS, 3RS, and 5RS foot mounted non-spring return actuators. Continuously adjustable from an electrically-powered controller, the actuator is suitable for use where precise control of slide motion or positioning of components is needed. This new design of an old favorite is fully tested and approved in both the industrial and commercial markets.
The M6194B1011 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U is fitted with a 24V hinge shaft opening, a thrust washer, and a 24V spring return actuating motor operating a differentially mounted actuator.
Non-spring return valve retains position set to control valve. Use for foot mounting and travel situations such as crane and track mounted systems.
One-way valves, non-spring return, and spring return actuation options help to ensure that your valve is correctly matched to its application. Product features include an actuator body constructed of impact-resistant polycarbonate plastic; an Adjustable limit switch mechanism for complete control over the opening and closing of your valve; a handle and slip ring assembly that protects against dirt and debris; a built-in stop/reset button, and a limit switch with a 1/8" conduit knockout for easy wiring access.
Free Shipping
In stock
