120v10.5-13.5vdcADJ T/S CCW/NO
Whether you're replacing a worn-out fan clutch, or adding a new one to your system, you can't go wrong with the M7164G1030 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U. This option works for the use of 120V10.5-13.5VDCADJ T/S CCW/NO and has two forms of motor styles, open impeller and enclosed impeller.
SEALED-MAGNETIC MOTOR; HEAVY DUTY; NEMA1; 6000 RPM; 3600 RPM @ 100 psi, 60 HZ (PLUS SPRING RETURN); 3 PHASE – 4 WIRE; COMPRESSOR MODEL: SAP3C OUTPUT VOLTAGE: 120V/10.5-13.5V/DC
This style offers a convenient low voltage non spring return that requires a min. sealing force of 0.5lbs for mounting and 1" air gap between canister & frame for proper operation.
The MODUTROL® 2 offers increased insulation through the use of a double walled casing isolating two units to protect patients from energy leaks. Protection circuits have been added to prevent thermal runaway in the event of motor failure or an internal short circuit, and a single-piece insulated cable with integrated thermistor is used for remote temperature sensing. All 120 VAC/60 Hz models are equipped with non-spring return.
For use with 2, 3, & 4 wire motors. Includes built-in magnet trip and adjustable thermal protector. Single phase motor starter, rating is continuous at 50/60 Hz or as variable with frequency control.
The M7164G1030 series is a current overload motor starter designed to operate 17 HP and larger single-speed motors. This product contains built-in overload protection which will shut the motor down in the event that current levels become excessive. It has a heavy-duty, stationary base with six heavy-gauge terminals on top of a current overload relay, while an automatic reset thermal protector will reset circuit breakers.
The M7164G1030 Series have an all-metal housing, worm gear drive output and are direct shaft mount. The motor can withstand a minimum of 60 seconds at 25A.
Free Shipping
In stock
