Honeywell M9194E1000 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U M7285C-c2

24v300#90/160 2/4minMotor1sw

The Honeywell M9194E1000 Series, Modutrol Spring Return 2 & 4 Minute Cylinder, 24VDC Motor, - /U, 7.5 to 12.0 Newton metres is designed to operate a door valve or other electrically operated equipment. This 2 or 4 minute warm up model has a built in limit switch so it only runs for the specified time and will not run longer than 2 or 4 minutes. The swing-over cylinder can be motor fitted with either a spring return (M7284) or non-spring return (M7285) configuration and will have a number of plastic

The M9194E1000 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U air curtain provides 24 volt, 300 CFM (Cubic Feet per Minute) airflow with a 90% laminar flow at 2/4 minutes on a 100 ft. length. Proven reliable performance combined with durability and backed by a three-year warranty make it the preferred choice for applications involving heavy traffic including places where food is handled, sports facilities, and warehouses. Each Spring Return Commercial Air Curtain comes with a built-in control device that ensures even air distribution across its entire length.

The Honeywell M9194E1000 Series includes a motor-spring return and a non-spring return actuators. The actuators are available in 24 volt / non-spring return / 300 pound / 2 speed / 4 minute and 24 volt spring return/300 pound/2 speed / 2 minute versions. The spool is stainless steel for long life, minimum maintenance and corrosion resistance.

The Honeywell M92H is a 2/4 min spring return (no float) actuator designed for use with the Modutrol H4 humidity control modules.

The M9194E1000 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U Modules from Honeywell open and close expansion-type damper dampers at a constant speed. Each output is able to be programmed for either spring return or motor-spring return operation. The M9194E1000 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U Dampers are available with medium rise or low rise heads and come with a factory setting of 2.5 min close time.

The Series 2000 Modutrol ® Motor-Spring Return and Non-Spring Return actuators are designed for use in controlling air or vacuum supply to a wide variety of pneumatic devices. They present linear control of both air and vacuum supplies with a wide variety of pumping capacities available.

These pushbuttons feature a built-in spring return mechanism. The operating force is adjustable by means of the internal spring, and ranges from 5 to 65 pounds. The rugged plastic button is tactilely identifiable and contains a light pipe that illuminates the legend in low ambient light conditions.