Honeywell MN6105A1201 Two Position, Floating Actuator with Aux. Switches

Fltg/2posAct24vac/dc W/2auxSws

The Honeywell MN6105A1201 two position, floating actuator with auxiliary switches is ideal for actuating loads such as: (2) Solenoid Valves and (2) Limit Switches. This actuator has positions for 24 VAC or 24 VDC. Auxiliary switches are located on the top and bottom of the actuator. This part number is a direct replacement for Honeywell part numbers 102-1030, 102-2430, and 101-1399. Each Honeywell MN6105A1201 Fltg/2posAct24vac/dc W/2auxSw

Standard Design Fltg 2 Pos Actuators are designed for applications requiring two position mechanical actuation. Standard Features include, 24VDC Output to handle solenoid coil currents up to 3A and a maximum coil voltage of 30VDC. 2 Auxiliary Switches linked to both the Standard and the Auxiliary Switch outputs is helpful for feedback of switch status.

The MN6105A1201 two position, floating actuator with auxiliary switches can be used for two position control applications. It is designed to position one or more devices using a 24 VAC/VDC power source. The MN6105A1201 has the following features:

The two position, wide throw actuator switches the motor from either external switches or an internal overload switch. The actuator can be motor lead through one of the two auxiliary switches and has terminal strip capability. It is normally open and closed with 24 volts, ac and dc.

The Honeywell MN6105A is a 24VDC fan position actuator with two auxiliary switches and a two position (floating) head. The MN6105A is factory assembled with leadwires and lugs. This actuator's mounting stems are 0.31" (8 mm) O.D.. The MN6105A can be used to replace any standard two position fan head in order to modulate or control on/off sequencing. The auxiliary outputs can be programmed for various functions such as proportional, sequence, time delay, ladder logic, and Boolean logic. One output can drive the fan motor

Controls position of a single pump or valve in two different positions for your needs. Activated by Honeywell's two position, ?oating actuator. Two LED auxiliary switches are available for monitoring status and/or alarms/exceptions.

The MN6105A1201 is a 2-position, toggle style, cylinder 1/8 in. NPT actuator with auxiliary switches. The cover plate is steel with zinc finish. Actuators include stainless steel lever linkage. The intermediate switch position is spring-loaded to lock in the intermediate position when desired. Auxiliary switches are solid state 24 VDC and are supplied with a 24 VAC primary voltage input up to 3 A but can be configured as normally open or normally closed types at 12 VDC input for auxiliary switch applications also.