Honeywell MP909D1334 PNEUMATIC DAMPER ACTUATOR 5-10# 2-3/8? JIT

PNEUMATIC DAMPER ACTUATOR 5-10# 2-3/8? JIT

Honeywell MP909D1334 PNEUMATIC DAMPER ACTUATOR 5-10# 2-3/8? JIT

Honeywell is a respected brand that delivers a great product. The Honeywell MP909D1334 PNEUMATIC DAMPER ACTUATOR 5-10# 2-3/8? JIT is a two piece miniature pneumatic actuator that can control 3 latching positions or center stile damper using external DC voltage source.(DC12V to 17V)

Pneumatic Damper Actuator 5-10lb 2-3/8" JIT. A damper actuator is a device used to control the airflow through an air passage, such as a duct or flue. Honeywell pneumatic damper actuators provide energy efficiency for small and large commercial buildings, schools, warehouses, hospitals and many more facilities. Pneumatic damper actuators are easy to install and come in a variety of sizes, capacities and configurations to meet any application. Damper actuators are basically on/off devices used by the end user to control air flow throughout the building

The Honeywell MP909D1334 Pneumatic Damper Actuator, 5-10#, 2-3/8" JIT Heads is suitable for use in dampers and grilles. This damper actuator contains carbon brushes that can be replaced within seconds using a standard screwdriver. This is part of the Honeywell 09 Series Actuators that feature a serrated disc valve, dual direction trip block, and tungsten carbide check valve.

Take control of airflow with the Honeywell MP909D1334 Pneumatic Damper Actuator. This pneumatic damper actuator is an additional operator to the standard manual operator that can be used for non-load instructions viz: fresh air, exhaust and make-up air regulating etc. The Honeywell Pneumatic Damper Actuator is designed with a user friendly compact design which can fit in any location.

This D1334 Pneumatic Damper Actuator from Honeywell is a two-way on/off and four-way modulating? damper actuation system designed for use with a variety of industrial and commercial HVAC dampers. It features dual-range, non-electrical micro switches for control, an actuator shaft with bores at three locations for adjustment without changing the mount or electrical connections, and a lever for manual override capability.

Pneumatic Damper Actuators provide a method of air control to meet the need of temperature stability in process control systems. The pneumatic damper actuates a blade to seal off, release, and/or modulate amounts of air needed to meet external process requirements.