Honeywell Q4100C9054 Silicon Carbide Hot Surface Igniter, Standard with Rib Offset From Left Edge Mounting, 5-1/4" Lead, 120V

"Silicon Carbide HSI 5""Lds"

For applications in which a standard hot surface ignitor is not long enough, the "Silicon Carbide HSI 5""Lds" is available with an extended length of 5-1/4"" (135 mm). Made of fully-sintered silicon carbide with standard rib offset from left edge mounting, this spare part numbers HSI02112 is perfect for replacement or insertion into new installations.

Silicon Carbide HSI 5""Lds

Silicon Carbide Igniters are designed for use in high temperature applications such as gas fired furnaces, industrial boilers, and kilns. Counter sunk mounting holes ensure easy installation and insulation is provided to protect the generated flame from outside elements. In addition to the standard mounting of 5""Lds from the left edge of the hot surface, models are available for mounting off the center of the hot surface, or to centerline."

This Honeywell silicon carbide hot surface igniter is 3/4""Lds with a 120V operating voltage. It is intended for use with gas logs.

This Silicon Carbide Hot Surface Igniter (HSI) is intended for use in appliances and fireplaces, and has a lead of 5-1/4" from the leading edge. It is rocker type with dimensions of 1/8"H x 2-5/8""W x 6-13/16""L. It has an offset rib from left edge mounting, 120V coil voltage, and includes one bolt.

This electronic heat-sensitive ignition module is designed to be operated by an electric fuel pump in home heating equipment such as a furnace or water heater that also utilizes a mechanical burner. This ignition module will initiate the combustion cycle on some, but not all off-the-shelf burners. Offered in a 5"" Lds (lead) size with a standard rib offset from the left edge of the mounting surface and 120 VAC voltage rating.

The Honeywell Q4100C9054 Silicon Carbide Hot Surface Igniter (HSI), with Rib Offset From Left Edge Mounting and 5.5"" Lead (120V) flame switch is designed for use on gas furnaces. The silicon carbide contact system helps provide extra protection against electrical arcing, and it lasts longer than most metal contacts. It features a rib offset from the left edge mounting so it can easily replace existing igniters.