Honeywell Q4100C9070 Silicon Carbide Hot Surface Igniter, Left Notch, 5-11/16" Lead, 120V

"Silicon Carbide HSI 5.688""Lds"

Replacement for Honeywell Model HSI100A10-L & 5.688""Lds Hot Surface Igniter used in select Salem, Jenrick, and Archer models.

The Honeywell Q4100C9070 Silicon Carbide Hot Surface Igniter is designed to provide reliable spark to gas burners. The Igniter comes standard with a left notch. This part measures 5.688""Lds"."

The Honeywell Q4100C9070 Hot Surface Igniter is a HSI for a natural gas or a propane-fired appliance. It has dimensions of 5.688""Lds" and is ideal for direct vent, wall, or boiler applications. . The HSI will produce an electrical spark up to 5.16"" above the burner surface to light your fire when it has been turned off with a switch or knob. Also included are a terminal lug, wire tie, and mounting hardware.

The HSI 5/8""Lds features a lead of 8.0 to 11.5"" and has notches that are not beveled. This item is also available in a kit, see our related products tab for more information.

The Q4100C9070 Honeywell Silicon Carbide HSI is designed for use with gas water heaters. This device is constructed out of ceramics and has a function to provide ignition for the combustion chamber. It comes with a lead of 5-11/16". This has an input voltage of 120V and runs at cycles per minute of 0-250.

Protect your home with a Honeywell Q4100C9070 Silicon Carbide Hot Surface Igniter, Left Notch, 5-11/16" Lead, 120V. It is meant for gas furnaces.

The HSI igniter is designed to operate the ceramic hot cathode modules from 1000°C to 2000°C in acetylene and oxygen process burners. DC voltage is supplied to the floating plate, and the contacting tip carries a strong negative bias. An arc which can be sustained up to 50 milliseconds forms between a conical point on the plate and the end of a platinum bushing.