Honeywell S443A1007 Rheostat135ohm180deg DPDT SW Rheostat135ohm180deg DPDT SW

Rheostat135ohm180deg DPDT SW

The 135/180 degree DPDT Snap-On Watt Meter incorporates our Standard Warranty, UL Recognition, Overload Protection and 4-Second Update Rate. This powerful meter has a Replaceable Induction Coil, Frequency compensation to 250kHz, and a High-Speed Timing Pulse Generator.

SMT 20A/16V DPDT Rheostat with LCD display

This circular rheostat, 180 degree, has a 0.75 in. diameter round frame, 3A/250VAC/DC mounting screw terminals and comes standard with NO/NC ends.

Toggle switch, Switches AC electrical current to an AC load in either direction, Series connection, Type: DPDT toggle switch, Switch rating: (A), Initial voltage drop: 0.5V max in OFF position (at 120 Vac), 2VA min at rated current, 1VA min at rated current; ON resistance: 135ohm

Some heaters use these DPDT switches on the upper limit when they are normally on. When the temperature is met, the heater shuts off.

This Honeywell Rheostat is great for use with your heaters, equipment and other electronics. It's made of sturdy metal and can be used in a window.

The S443A1007 is a general purpose, non-junction, double pole switch with a line voltage range of 110 to 250 Volts AC. It features a rated switching capability of 18 Amperes at 180 degrees and a maximum operating temperature of 82C (180 deg F); the temperature and power derating curves are provided in the data sheet. It is UL/CSA listed.