Honeywell TR40-CO2 TEMP/CO2 SYLK WALL MODULE

TEMP/CO2 SYLK WALL MODULE

Check the temperature and carbon dioxide level of your most recen tly modified incubation chamber with the TR40-CO2 TEMP/CO2 SYLK WALL MODULE. The clear case gives you easy visibility into the internal instruments, and it is designed for simple installation without requiring much technical knowledge. Multiple adjustable mounting positions let you choose the position that best fits your own personal incubator setup.

The Honeywell TR40-CO2 TEMP/CO2 SYLK Wall Module is a wall-mountable unit that can be installed alongside any conventional thermostat or other HVAC control system, specifically for the control of CO2 levels. 100% compatible with the Excelon series of thermostats, using these modules together will let you easily monitor and maintain CO2 concentration in the growing room environment.

Measures temperature and carbon dioxide with no additional sensors. The TR40-CO2 WALL MODULE CO2 Transmitter is designed to provide continous measurements of %CO2 and %RH from a single location. It directly transmits this information to any TR series wireless transmitter as well as the HMD wireless wall module.

The TR40-CO2 is a direct connection wall module that will display the indoor temperature and carbon dioxide sensor readings via Honeywell Total Connect Comfort TXP or iComfort LCD Touch Screen Thermostats. This wall module allows you to remotely view the temperature and CO2 levels from anywhere at any time.

The TR40-CO2 Wall Module can be mounted to a wall or ceiling. It continuously displays two different temperature and CO2 readings from any HONEYWELL NTC sensor. These registers are not only ideal for greenhouses or crop houses, but also laboratories, schools, hospitals, and industrial settings that require both temperature and CO2 readings.

This wall module features a silk-screened readout, which makes it easy to read. It can display the current temperature and CO2 levels indoors. It can also help show how your CO2 application is working by demonstrating the benefits of CO2 enrichment to your plants with an indoor air temperature gauge that records high and low measurements for up to 14 days in ºF, or 12 days in ºC. The wall module's separate dual probe ports let you monitor two different areas (for example, a nursery and an adjoining propagation room) independently.

The Honeywell TR40-CO2 provides an affordable, easy-to-install and compact wall module for monitoring of CO2 and room temperature. It has a built-in relay that will activate a DC output when CO2 reaches setpoints or rises above a certain level. The TR40-CO2 is also has the ability to transmit information over RF (Radio Frequency) to RS232 devices.