Honeywell TR40-H-CO2 , Inc. TR40HCO2 TR40 Wall module, Temperature, Humidity, and CO2, two-wire Sylk

TEMP/HUMB/CO2 SYLK WALL MODULE

The Honeywell TR40-H-CO2 is a Temp/Hum/CO2 wall mount transmitter. It is very accurate and is a plug in module that installs easily. The HoneywellTR 40 CO2 Wall Module measures every parameter needed to manage temperature, humidity, and CO2 levels for agriculture environments

The Honeywell TR40-H Wall Module is a temperature, humidity and CO2 alarm with two wire system. This controller offers infrared sensing for operation in a carbon dioxide range of 0-10,000 ppm. The Honeywell TR40-H Wall Module is ideal for hospitals, retail environments, restaurants, meat packing plants, food storage areas and any other environment that requires temperature and humidity control.

The TR40-H-CO2 is a two-wire wall module that combines humidity, temperature, and carbon dioxide measurement into one convenient unit. Ideals for use in hospitals, clinics, industrial facilities or in the home.

The Honeywell TR40-H-CO2 temperature, humidity, and carbon dioxide data logger wall module features a plot of time-stamped data on a single-page log, with up to 16 data points. The TR40 is ideal for measuring temperature, humidity, and carbon dioxide in college labs, medical centers, greenhouses, or other settings where science is conducted.

Built to perform the way you want it to, the Honeywell TR40-H-CO2 wall module provides you with all of the information you need. When combined with our line of Comfort Series Sensors, this unit monitors temperature, humidity, and carbon dioxide levels in just about any area you want.

The TR40HCO2 is a highly accurate wall module that provides both temperature and relative humidity measurements, as well as carbon dioxide concentration in a variety of emissions situations. It can be combined easily with other modules in the TR series, and communicates over 16 bit DeviceNet™. The TR40HCO2 operates from 115 VAC power and does not require any connection to the network cabling system. Temperature and relative humidity are transmitted over the two-wire communications bus via DeviceNet™ networks. Carbon dioxide concentration readings are transmitted via NRT signaling protocol over fieldbus CANopen® or Advant® protocols. The Module

Honeywell's TR40H-CO2 comes with a wall mount kit and utilizes standard analog signal format for the outputs of temperature, humidity, and carbon dioxide level from Honeywell CO2 sensors (NTC type).