Honeywell V5011N2022 Globe valve with Linear Actuator- Black and White - /U V5011N_ML7984-1

"1/2""BODY PDTC LINEAR 1.85cv"

The V5011N2022 is a 1/2" body solenoid valve (electronic actuated) with line end actuator for direct replacement of SPDT toggle/rocker traditional pneumatic valves. The unit is compatible with a wide variety of industrial applications and requires only a standard 110V power source. This electromagnetic linear actuator provides precise actuation at light loads (<6VDC) that would be too difficult or impossible to achieve with human power.

For water-heating and domestic-hot-water applications where a 0-10V output is desired. Includes 2 WM1 actuators and 1 control box (not shown). Linear actuator body packaged separately. Actuator sold separately. Aluminum actuator body 10""L x 1""W, length of lead wire 6'"; plastic actuator body 1/2""L x 3/4""W, length of lead wire 6'". Lead wires are 24 AWG stranded wire with ASME connectors at both the actuator and control box ends; 2 straight through pins; 1 straight through pin to 2 parallel

The Honeywell Linear actuator is an end of line actuator designed to operate with the Honeywell linear series valves. It features a motor that will allow for 360 degree rotation and 45 degrees of up/down vertical movement. This design provides the ability to position the valve with more than just a single rotational axis offering a higher level of control. The motor can output up to 1.85ccm of air at 3.0 cfm allowing the unit to provide enough power for larger valve applications. This actuator is designed to fit within the valve body and utilizes a wire remote control, allowing for greater installation flexibility in

The Honeywell V5011N2022 is a globe valve with linear actuator that is available in black and white. This item has a ceramic body for durability, and it fits a 1/2" nominal diameter bore.

A linear actuator is a motorized component that linearly moves its output shaft or rod in response to a command signal. The movements enabled by this actuator are translatory, rotary, and oscillatory, and you can adapt it to most applications using a variety of controls such as limit switches, proximity sensors, pressure transducers etc.. Thanks to its compact size, its fast response time (200ms), it does not need any additional adapters to perform an axis movement.

The Honeywell Linear Actuator (Black & White) is designed for use in gas-fired hydronic heating and domestic hot water systems. It is an industrial grade commercial valve that can handle up to 1.8 cc flow. The unit is assembled with 6 allen head screws.

This valve uses linear actuator that makes movement smooth. It is designed for the Basic Model.