Honeywell V5863A1006 "3/4""Npt 3-WayMix ModWtr CV 2.9"

"3/4""Npt 3-WayMix ModWtr CV 2.9"

The Honeywell V5863A1006 3/4""Npt 3-WayMix ModWtr CV 2.9" is a three-way mixing valve for hot/cold waterlines in residential installations and has a minimum operating pressure of 30 PSI.

The 3/4""Npt 3-WayMix Valve controls both the water supply and the hot water output of a spa or whirlpool bath. The trim allows for the valve to be installed into an existing circuit panel with a minimum amount of field modification.

The V5863A1006 is a 3/4""Npt Three-way valve, DN15, 3/4""NPT Mixing Valve with 2-position OFF position. Made from brass with copper trim. The Three Way modulating mixer valve is designed to provide a flow ratio in either ON or OFF mode of the same value and within 1% of full scale. In addition; compact size, rugged construction, high accuracy and excellent actuator performance make this 3 way valve best in class.

The Honeywell V5863A1006 allows you to control multiple mixing valves and flow rates with one remote. The 3/4" NPT (threaded male) 3-Way Mixing Valve Control Valve is ideal for boiler-feed applications where flow can be monitored and controlled from one location. The 2.9 GPM (gallons per minute) maximum rated flow rate is enough to handle hot water use in multiple locations within the home, providing hot water at a variety of temperatures.

Introducing the new 3/4 inch NPT Three Way mixer. This Efficient 30 Series water configured unit, is used for the balancing of 2 input water sources. The 3-way is able to make the most out of all incoming water stream pressures by delivering Hot/Cold or Cold/Hot water streams, as desired by the end user. Add on features include: Dual temperature sense, Power Flow Control, and Safe nozzle technology to ensure that you are getting nothing but pure water. These features allow the 3-way mixer to maintain a safe quality of water with the minimal flow rate; therefore saving time and money at

The V5863A1006 3/4-inch Mixing Valve is a mixing valve in the 2.9 inch body with 3/4 inch female NPT inlet and outlets. Used with the V5018A1003 3/4-inch In-Line Flow Control Valve in two-pipe hot water systems to provide for mixed hot water, including domestic and commercial applications.

The 3-Way CV Valve from Honeywell can be used to control a variety of applications such as: mixing hot and cold water, controlling the temperature of hot water in a building, or regulating the flow rate of water.  The valve has a maximum working pressure of 145 psi at 250°F.