Honeywell VBN2ABPX0000 1/2NPT 2W .38Cv BRS DCA PRFL

1/2NPT 2W .38Cv BRS DCA PRFL

If a 1/2NPT 2W .38Cv BRS DCA PRFL is what you need, then take a closer look at this Honeywell VBN2ABPX0000 1/2NPT 2W .38Cv BRS DCA PRFL product. Made of anodized aluminum in gray color finish, its applications include Natural Gas or Propane. Make sure to compare other components that are made by Honeywell also. Availa

The VBN2ABPX0000 1/2NPT 2W .38Cv BRS DCA PRFL from Honeywell is a 2-way solenoid valve designed to automatically change directional of flow by using pneumatic pressure. It has a balanced plunger, and includes manifold, lever, diaphragm, plunger, and spring.

The Honeywell 1/2 in. pressure reducing valve can be used as an on-off control for a range of industries and facilities, including chemical, manufacturing and power generation. It is also known as a DCA PRFL.

This ball valve is designed for use with brine, cold water, hot water, and steam. The mounting stem assembly is 16 in. long. The stem and lever handle are made of stainless steel. This ball valve has a 1/2 in. NPT female connection and a 12 in. WC male threaded stem assembly to connect to the manifold. The ball and trim shall be 316 stainless steel, maximum tolerances being controlled by ASME B16.34."

The Honeywell 1/2" Foot Valve, from the Swagelok VAC+ Performance System is designed for use in vacuum systems where flow rates are high and pump suction PSI is low. The foot valve maintains system integrity and eliminates the need for extra valves and fittings within the system. The valve is capable of functioning as a vacuum relief valve when used with a pressure-relief ball valve to help prevent the system from exceeding its maximum allowable vacuum pressure.

Bulkhead style ball valve for use on barbed pipe. Built-in non-return check and diaphragm for positive shut off. 1/2 inch female NPT threads. 1/2 inch male BSP swivel connection. ACME threaded stuffing box with ceramic packing gland.

A perfect solution for control valve systems in which a pilot or low control signal is required. A built-in check valve provides a constant process connection while the solenoid valve is actuated, eliminating wasted effort from leakage current during non-actuation. The spool supply feature allows for a greater flow of product compared to traditional magnetic pilot valves. J-FRAME GAUGE BODY PART NUMBERS ARE LISTED BELOW.