Honeywell VBN2AFPA0000 1/2NPT 2W 2Cv BRS STD PRFL

1/2NPT 2W 2Cv BRS STD PRFL

The Honeywell VBN2AFPA0000 1/2NPT 2W 2Cv BRS STD PRFL is a 1/2 in. by 2-wire, 2-circuit steel back pressure regulator with a stainless steel body and brass chambers. This regulator is designed to handle low pressure industrial gases, such as: acetylene, propane, butane, helium, oxygen and nitrogen. The regulator has two distinct connections. One connection is female NPT for input of gas; the other is female pipe thread (BSPT) for output pressure. The steel backplate provides maximum strength to the regulator

Known for its drip-free performance and quality, the Honeywell VBN2AFPA0000 1/2NPT 2W 2Cv BRS STD PRFL is a dependable submersible pump. Used in water wells, drip irrigation systems or for a variety of other fluid transfer applications. The pump has a heavy nylon brushless motor to reduce wear and tear, and includes a spring guard protector, overload protector, and thermal shutdown protector for added safety

The VBN2AFPA0000 1/2NPT 2W 2Cv BRS STD PRFL - Honeywell is a 0.5" NPT 1/2" & 3/4" water connections back flow preventer with priflo check (Cv) and sweep (S) features.

The VBN2AFPA0000 Honeywell VBN2AFPA0000 1/2NPT 2W 2Cv BRS STD PRFL is Recommended for use on commercial boilers operating at 11.8 to 31 psig (80 to 200 kPa abs) with Inlet Pressure range 5 to 20 psig (35 to 140 kpa), Best suited for Bar Restaurant Sanitary (PRS), Low or Medium Boilers Energy Saver (BLS), Medium Pressure Commercial (BMS)

The Honeywell VBN2AFPA0000 is a 1/2" NPT 2W 2Cv BRS STD PRFL. This product is a direct replacement for current valve model WP483D.

The VBN2AFPA0000 is a 1/2NPT 2W with 2Cv.  It has the BRS STD PRFL or BRS SIPR for reduced pressure steam and a BPA free actuator.  0.5-15.0 PSIG (3-103KPa).

The Honeywell VBN2AFPA0000 1/2NPT 2W part, number 0001-0001-0203 , is a gas valve for the Honeywell BRS series boilers. It comes with a black paint finish along with a brass bonnet. The gas valve allows for the burner to be connected to the boiler's gas line which then heats up the water inside. The flame indicates that the valve is open and ready for use in heating your water. This is a 1/2" NPT 2W valve, meaning that it has a female pipe thread and requires two wires going into it.