Honeywell VBN2AHPA1000 "1/2""NPT 2W 4.7Cv FLTG NSR 24V"

"1/2""NPT 2W 4.7Cv FLTG NSR 24V"

HONEYWELL VBN2AHPA1000 1/2""NPT 2W 4.7Cv FLTG NSR 24V 692126

Honeywell VBN2AHPA1000 1/2"NPT 2W 4.7Cv FLTG NSR 24V  is a contactor that has a current rating of 4.7A (135-Volt AC), voltage rating of 24 Volt AC, 3 Amp resistive and 1/2 in NPT conduit size. Contactor features arc fault protection that protects against arc faults caused by contact with conductors, convenience receptacles or switches.

The VBN2AHPA1000 1/2" NPT 2W 4.7Cv FLTG NSR 24V is a five pole, adjustable speed, line-start DC motor designed for horizontal centrifugal heat pumps and variable air volume air handlers. To make pump system balancing easier, the design uses an end thrust collar with a limit switch and pump head with adjustable set screws. This motor has both hot gas discharge and electric heat coil in the stator to reduce ampere draw during start up. It comes in a high temperature galvanized finish to stand up against rust.

The VBN2AHPA1000 is a 24VDC 2-Wire 4.7 C.F.M. non-shorting model blower with 1/2" NPT outlet and AISI 304 stainless steel body. The VBN2AHPA1000 is used for high static pressure, low air speed applications where minimal stalling is desired.

"Vacuum Breaker, 2W, Flanged, 24VDC, NPT" HONEYWELL VBN2AHPA1000 /002066-1.000 |   (3079455)

This high quality Honeywell valve is designed for use with small gas lines. It has a small body size, cast iron stem, and polypropylene handle. It comes mounted on a stainless steel insert. It features a 2-way operation with full drain, convertible to 1/4 NPT inlets and tops, rated for 24V DC operation.

The QW35 is part of the SV90 Series and the perfect solution for contractors looking to work in areas that exceed the NEMA 5-15 standard range. The QW35 has a maximum voltage of 690 volts and a maximum current draw of 3.4 amps. Its 30 amp plug is capable of supplying power to multiple tools at the same time, or to a tool with a large current draw such as a planer.