Honeywell VCZAE1100 "1/2"" InvFlare 2way 3.2Cv" "1/2"" InvFlare 2way 3.2Cv"

"1/2"" InvFlare 2way 3.2Cv"

The 1/2"" InvFlare 2way 3.2Cv" control provides design parameters for specifying a model C direct ignition valve command and control system. It can be used to specify the design dimensions of a valve body, solenoid operator, wiring harness and electronic controls necessary to interface a Honeywell VC-Series valve with other advanced technologies not provided by the "1/2"" InvFlare 2way 3.2Cv".

The 1/2" InvFlare 2-Way 3.2Cv is a manual gas shutoff valve that is brass and comes in a gold color. It has an adjustable inlet setting and is designed to be used with pipeline systems.

Control gas pressure and eliminate backflow. The InvFlare 2-Way Valve models are available for 1/2" gas supply lines. These valves will also prevent the flow of gas if the high side has failed. They require 28 inches of clearance.

The InvFlare 2 wire 100-ohm, 2 way, 120 volt control illuminates different fixture types. It is designed on the principal of professional ballast circuitry that offers the snap-action switching between circuits in the channel. This model provides ultimate line voltage control for low energy consumption and standby energy-saving operation. The InvFlare 2 is used to replace conventional limit switches in down lighting applications.

InvF-2WY-3.2 is a gas valve with a rated capacity of 3.2 Cubic Feet per Hour (CFH), eight flare ports and 9/16"-18 Pipe Thread outlet. It's a 1/2" NPT design, comes with one micrologic sensor and an optional telegram feature that acts as an alarm if the flame goes out.

The VCZAE1100 1/2" Inverted Flare, 2-Way Cross is a single- or 3-port value class saddle valve with an inverted flare for use in potable water, condensate and domestic water distribution systems. It is suitable for applications with low pressure drop, pressure confinement and small size requirements.

The 3.2Cv, 2-position switch has a manually operated handle, easy to access. Offers two separate stop/off positions and is Damp-Proof to protect against possible explosion from outside sources (i.e. lightning, water leak), or appliance malfunction Hot surface indicator lamp warns of dangerously high temperatures inside enclosure, allowing appliance to cool to avoid burns  Conduit box has textured finish for improved mounting & installation Three-wire design: Hot, Neutral & Ground Deluxe knob with a nickel plated finish and color coded markings for ease of identification Features factory installed cover cap Includes wire leads for power connection