Honeywell VCZBB3600 vczal3100 2-way vc valve, 0.75 in. npt, 4.7

"1/2""fpt1.3cv=%ForNSRfltg&ModAc"

The 2-way model VCZBB3600 vczal3100 2-way vc valve, 0.75 in. npt, 4.7 cfm, 12 psi achieves your needs with the quality that you have come to expect from Honeywell. This valve is designed to meet your needs with features that include a thicker walled casing for high pressure service up to 200 psig at temperatures of 0 f to 180 fs., 1/2""fpt1.3cv=%For NSRfltg&ModAc"

This valve is a 2 way vc valve, with an inlet connection of a 1/2""fpt, it has an outlet connection of a 1/2""fpt. This vc valve is used for modulating applications and service pressures up to 30-90psi.

The Honeywell 2-way valve is designed to control the flow of gases and liquids. This 2-way valve has a 1/2"" inlet (NPT) and outlet (NP). The 3/4"" stem is made from brass, and it is considered one of the most reliable brands in valves. The valve activates 360° and is completely balanced.

A 6.89"" valve to fit just about any application. Model VCZBB3600 has a 0.75""in. NPT female threaded inlet and outlet ports. The VCAL3100 is the same valve with shut off linears instead of cv's and is for pneumatic on-off operation only, designed to be used in a stainless steel panel less than 10"" wide open on one side

The Honeywell 2-Way Valve with Certificate of Approval Type A, Class 1, Division 2, Group B is used in applications where an actuator controlled as/on demand by a pressure switch is actuated by an external control signal. Differential pressure is maximum 4.50 psi (30 mmHg).

The Honeywell VCZBB3600 is a 2-way, Pneumatic, Non-Adjustable Velocity Control Valve that controls both High and Low Pressure. It is designed for use with oil or gas fired furnaces, boilers, water heaters, and other medium to large commercial or industrial applications. The main functions of the 2-way valve are Pilot Operated Control (POC) and automatic operation in which the valve is actuated by a pilot signal and automatically opened when the pilot signal goes off. Naturally, you should consult with your HVAC supplier before selecting components for your system.

It's a 2-way valve that's designed to be installed on the discharge of a compressor's suction line.