HOT WATER COIL KIT for Bunn - Part# 12689.1000

HOT WATER COIL KIT for Bunn - Part# 12689.1000

The Bunn 12689.1000.000 hot water coil kit converts your Bunns to the ability to brew coffee with 120VAC (electricity). This 60 watt coil is used in all commercial coffee brewers except for NTX (non-thermal exchange) systems.

The HOT WATER COIL KIT is a replacement coil for the Bunn MCU & Bunn NHB commercial brewers series. This replacement part features a hot gas bypass feature, a natural convected heated water path, a stainless steel construction and more.

Replace this hot water coil on your Bunn home coffee brewer to lengthen the life of your machine. Use the handy thermometer provided with the kit to make sure you are making hot enough coffee, not too hot! BUNN recommends stripping off all components including the tank, any washers, nuts and seals. Follow the installation instructions inside.

Convert your Bunn Two Tank Setup Coffee brewer with Stainless Steel tank to Hot Water Filtration. Starter Kit includes Hot Water Coil with installation tubing and supply line, inline filter, supply fill cap, fill tube with supply line (and installation) assembly, hot water connection union (with tubing), hot water thermoswitch (with wiring harness) and plug for power cord.

The Hot Water Coil Kit is the answer for boiling one liter of water to 155°F in less than four minutes. The kit includes a high temperature stainless steel coil and nozzle assembly, the manifold brew head with spray heads, solenoid valve and electrical harness, and a 3/4" inlet and outlet bulkhead fitting.

The Hot Water Coil Kit assembly can be used to upgrade 4 or 5 gallon brewers with a hot water coil system.

The coil uses an electric heating element to allow instant hot water. This product is compatible with Bunn models FX-B, FX-BL, FX-BLSD, FX-BSE, GX Velocity Brew, HDX Velocity Brew, Velocity Brew XL HDX.

Easily convert your Bunn MCU series brewer to dispense hot water, or keep warm. Kit includes an additional internal burner to raise internal temperature of the brewer to 160F.

This kit will allow you to easily upgrade your legacy Bunn coffee brewer that does not feature hot water to one that does.

This small inexpensive coil will fit into your paper filter / water tank to provide hot water at the touch of the lever.

How to make coffee in 4 seconds with no waste.