"HTP, INC." 2469702 HTP, INC. BURNER DOOR CERAMIC REFRACTORY The tank water temperature sensor is used to dete

The tank water temperature sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well.

The Tank Water Temperature Sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well.

The tank water temperature sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well. The sensor is a thermistor that has been encapsulated in epoxy and then mounted in a Noryl® frame. The sensor has an epoxy-filled heat cable extending through it to the well bottom where it is immersed in the water of the tank. The heat cable conducts thermal energy from the water to the ceramic element inside the sensor and from there to the base of the thermistor, which converts thermal energy into electrical voltage proportional to tank water temperature. This voltage is proportional to absolute

The tank water temperature sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well. The tank water temperature sensor and probe are inserted into the well and are available in solid lead or copper connections.

The tank water temperature sensor (3/8" NPT male threads) is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well. The sensor is 3/8" male NPT threads and 5' of 3/8" insulated flexible tubing (this length allows for about a 2-foot penetration into the tank).

The Hooper Mfg, Inc. BURNER DOOR CERAMIC REFRACTORY is used to prevent tank water from freezing and damaging the tank or aquastat. The tank water temperature sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well. The HTP, INC. BURNER DOOR CERAMIC REFRACTORY is made for a wide variety of applications such as residential and commercial water heater tanks, tanks associated with pumps, engines or other machines and solar powered systems with Aqua Stat terminal boards.

The temperature sensor can be installed at the inlet or outlet fitting and may be mounted via a bulkhead fitting, quarter turn valve, or other connector. To simplify installation, the wiring connection is made inside the thermostat housing. For tanks with air inlet and outlet valves, will use a separate sensor for each valve. The tank water temperature sensor is used to determine the temperature of the water inside an indirect or storage tank with an Aqua Stat well .

The HTP, INC. 2469702 is a sensor used to determine the water temperature inside an indirect or storage tank with an Aqua Stat well. This item can be found in our heating and cooling controls section of our website.