HUNTSMAN 138-14527 411P 2X4-1/4 ALUMINUM RIGID HOLDER&117A HEADGEAR

411P 2X4-1/4 ALUMINUM RIGID HOLDER&117A HEADGEAR

The HUNTSMAN 411P 2X4-1/4 ALUMINUM RIGID HOLDER&117A HEADGEAR are the right tools for the job.

This 2x4-1/4 aluminum rigid holder and 117A headgear kit is for use with 411P Power Support, 411P-390, and 411P-395. It is intended to be used in conjunction with 411P-KIT which includes two ALJ-2X4-1/4, two ALG-117A, two AEG-411PC, one AEA-RMS40LT, one AEA-CMS50LT, one ALG-166B0, one RMS40P, and one CMS50P.

Hi-Flow 2X4-1/4 aluminum rigid nail holder and 3in1 headgear. (nail holder inside the box, the headgear in a bag.)

These products can be used together or separately depending on the job at hand. The 411P aluminum rigid holder is easy to operate and built to last. The rigid headgear holds tight and will not allow the helmet to move during use.

The HUNTSMAN notebook holder is constructed of lightweight aluminum and includes screws to mount directly onto any standard 1" diameter storm shelter frame. Available in two lengths, the Huntsman 2x4-1/4 inch Holder includes top hanging capacity for full headgear. The screws are included with this rigid holder.

Whether you're looking to replace an old one, or just need a new one, the Huntsman 2X4-1/4 Aluminum Rigid Holder features an adjustable headband with plastic snaps for quick and easy adjustment.

The RIGID HOLDER is designed with a flat bottom to help increase support and prolong the life of the headgear. The rigid holder is made from aluminum with integral hinges that are molded into its base. This rigid holder was designed to hold four 1" x 4" x 1/4" acrylic squares.

Get your tools within easy reach with this aluminum holder. 31" long, holds two 2x4-1/4's or two 2x6-1/2's. Could also hold signaling devices, brooms, hoses, etc. Comes with hanger and hardware to mount on wall so you don't have to worry about storage. Die cast zinc headgear bolted to front."

Measure: 2X4-1/8, Number of Way: 1, Length: 4-1/8?.

Our 11-inch Aluminum 2x 4, Part No. 635422 has A= 6.49 inches, B = 6.65 inches, C= 4.78 inches, D= 1.75 inches, E = 1.55 inches, Thickness of .0689 inch. UPC# 059956064222

This holder has been designed to hold the following headgear:

Huntsman Lightweight, steel frames provide solid support for lightweight ALUMINUM ladders. There are four style of aluminum ladders available for varying situations.