ICM Controls ICM517 Single Phase Surge Protector with Nema Type 3R Rated Enclosure, 16" Depth, 2.78" Width, 5" Length

"120/240v1ph MaxSurg 100

ICM Controls ICM517 Surge Protector with Nema Type 3R is a 120/240v1ph MaxSurg 100A 600V Line to ground and Line to line single phase surge protective device. This IS0-15271-1 2nd Edition surge protector can be used for all electrical components, electrical motors, modems, electronic ballasts, refrigeration equipment, fluorescent lamps and much more.

Maxsurge 500

ICM's surgeless surge protectors provide a solution for electrically noisy applications. The AC and DC power sources are isolated using a toroidal transformer. The isolation barrier provided by the toroidal transformer provides an effective noise filter for the sensitive circuits in today's electronic equipment especially for automotive and office environments. They filter out common mode noise that would otherwise be coupled into the circuitry via ground return on either AC or DC lines."

The ICM517 is an IEC Type 3R Enclosure, NEMA 4X/IP66 rated, 517 Joules non-sacrificial surge protective device with combination voltage ratings of 120/240VAC and a maximum surge current rating of 100KAIC. The ICM517 can be secured to the DIN Rail by the included hardware.

This surge protector is useful for use in industrial, commercial and residential applications to protect connected equipment. It is a 2-outlet device with a clamp-on wire guard that has an in-line grounding screw. The design of the surge protector is approved for damp locations.

Protect Your Equipment With One of Our Surge Suppressors

The ICM517 is a surge protector constructed with UV resistant NEMA 3R rated plastic and a die cast zinc housing. This Class 2 surge protector features a Manufacturer's Lifetime Limited Warranty against defects due to workmanship or materials for the entire product.