ICM Controls 66089 Lockout Protection Relay for Impedance Relays

18-30 VAC LOCKOUT PROTECTION RELAY

Protect your lockout system from unexpected electrical power interruptions and shut down by installing this ICM Controls' Lockout Protection Relay. Its 18-30 VAC voltage helps to keep your control system fully operational. With a durable plastic housing and protection against short circuits, this Lockout Protection Relay meets NEC Article 609 requirements. The spdt relay makes it easy to connect with one easy wire connection.

This ICM Controls 66089 Lockout Protection Relay for Impedance Relays is designed to protect inductive loads from lock out caused by a sudden application of power. This relay is specifically designed to be used for inductive loads with an input voltage between 18 and 30 VAC, a no load current between 0.1A and 1.5A, and an internal resistance between 0.1 Ohms and 360 Ohms. It features a SPDT (single pole double throw) type contact and a 2 milliamp slow blow fuse.

ICM Controls 66089 is a lockout protection relay used in the A/C, refrigeration and HVAC industries.

Lockout protection relay automatically shuts off air conditioning equipment if a 480 volt circuit or two 275 volt circuits are overloaded for more than 20 seconds. Air conditioning, refrigeration, motor control experts, and electrical code officials prefer this reliable and inexpensive device to the many complex overload protection circuits.

ICM Controls introduces a lockout protection relay for their line of impedance relays. This relay is designed to lock out the circuit during maintenance, maintenance testing or troubleshooting activities. The relay prevents operation or connected equipment from damaging high voltage and/or life-threatening arcs. The 66089 is a perfect option for connections from one of our impedance relays, for example, the 66305 current transformer set with the 66215 input module, 66235 & 66236 Universal Full Wave Bridge sets, or for current transformers and current shunts in general.

The ICM Controls 66089 Lockout Protection Relay for Impedance Relays protects motors and generators from motor burnout due to excessive currents caused by line high/low.

The ICM Controls Lockout Protection Relay will protect your system against accidental lockout during maintenance. You may be required to use this relay in accordance with the applicable safety standards and codes.