IDEC Relays RTE-P2AF20 IDEC ANALOG TIMER 120/240V

IDEC ANALOG TIMER 120/240V

IDEC Relays RTE-P2AF20 IDEC ANALOG TIMER 120/240V

The IDEC Relays RTE-P2AF20 Analog Timer 120/240V is an electromechanical switch. It has a single rate operation function, which allows the user to set it once for several hours and leave it on until manually turned off. It comes with an external adjustment to turn time positions into equals. 1 year limited manufacturer warranty.

The IDEC Relays RTE-P2AF20 Analog Timer is a 120/240V, 50/60Hz timer that has been designed to control the operation of electric devices such as lighting ballasts. It uses magnetically operated, solenoid-type switches that operate two stages in sequence. This IDEC Relays RTE-P2AF20 Analog Timer provides an adjustable on time and off time. An arrangement switch determines the connections between the input stage, the first

The IDEC 120/240V Timer controls 24 VAC loads up to 750W. Provides ON-delay and OFF-delay, and up to 4 ON durations per day.

The IDEC RTE-P2AF20 Analog Timer is an industrial controller that provides users the flexibility of time control up to 99 hours and 59 minutes. The timer circuit includes a delay offset function at 0s for controlling disconnect functions and low water float system to activate pump for water supply or waste water container. It also has a valve contact output function for external valve controller when used in power ON condition. This timer will work with all DC voltage input .

The IDEC Relay Timer is designed to time varying voltages, illuminations or currents by means of an electronic time relay. Two timers are available: RTE Series Maximum on time: 10 Minute.

IDEC relays offer a wide range of applications for complex industrial and building automation systems requiring accurate and reliable timing control. The IDEC RTE-P2AF series of Analog timers is a family of multiswitching-channel, multivoiced relays designed for both ON/OFF control and time-delay applications. Contact ratings are interchangeable among all eight models within the family. Selectable closure by one or more contacts as well as optional delay for CLOSE is standard on all models.