SIEMENS 609557 Flush Mount, 125 Amp, 8 Space, 16 Circuit, Load Center

INDOOR MAIN LUG LOADCENTER 125 AMP 8-16 CIRCUIT| For Use With Siemens Q Series (Qp Type) Circuit Breakers | Surface Cover | 3 Wire | 120/240Vac

SIEMEN 609557 flush mount, 125 amp, 8 space, 16 circuit load center. For use with SIEMENS Q Series (Qp Type) Circuit Breakers. Surface Cover. 3 Wire. 120/240Vac. 609557 is an Equal Opportunity Employer - M/F/V/D.

For Use With Siemens Q Series (Qp Type) Circuit Breakers| Surface Cover| 3 Wire| 120/240Vac

The Siemens 609557 is a load center designed for residential use and can be used with 125 Amp Siemens Q Series circuit breakers. It features a surface cover and 3-wire installation that are designed to maintain the safety of the circuit breaker during operation. It also has 16 spaces and comes in an indoor main lug, loadcenter design.

Branch Circuit Breaker Loadcenter With Indoor Main Lug Loadcenter, Spacing: 42 Inch Fits Circuits: 8-16 Surface Cover For The Exterior Of The Loadcenter Must Be A Color And Texture Suitable To Nonmetallic Sheathed Cable

SIEMENS 609557 Flush Mount, 125 Amp, 8 Space, 16 Circuit , Load Center . This electric load center is designed for use with a Siemens Q Series QP circuit breaker. The load center features a brass bushing to be used horizontally. The load center has three 1/4 in. knockouts along the top edge of the cover and two 1/8 in. knockouts on each side at bottom panel. The load center is UL listed for indoor use only.

Our Main Lug Loadcenters are specifically designed for use in outdoor applications, while meeting the UL 489 requirements for indoor use. Featuring single pole switch and receptacle sections with a 5" wide bus to create 2 poles when needed, allowing the interruption of equipment operation when servicing. Patented ArcWatch ® Lug And Weatherproof System offer greater protection against arc flash, a potential source of fires and explosions caused by energized equipment.

The Siemens QXQM125 indoor load center provides 125A of current in a 16 circuit, 8 space housing. It is designed for use with zero-clearance applications and comes with the necessary hardware for drop-in installation in similar loadcenter environments. There's even a cover plate for a surface mount option. With space for both NM and conduit wiring, it's an ideal solution for residential and light commercial applications.