FRYMASTER F10251 LLC KIT SMT INTFC STD GAS W/BL DV

Interface Board Kit

Interface board kit includes: 2 board mounting screws, 1 bag of electrical connectors, 1 bag containing transistors, resistors and capacitors used in design. IAC Electronic Parts Catalogue available upon request.

Interface Board Kit for use with the FRYMASTER F10251 LLC and F10251 G4 to provide High Pressure options and PWM control. The FRYMASTER Interface Board is a plug-n-play interface board that interacts through the existing controls of the Frymaster. This board allows the user to command high pressure cooking without the need of two separate burners, which would require more time and space to use. This board provides preset functions that turn on/off the heating elements

This board is designed to be used in conjunction with a FREE Open Source GCode Sender program. The Interface Board Kit contains everything needed to connect and cable your F10 gas fryer to a PC, Embedded System or other external controller. This board uses the well established and proven USB protocol to communicate with your computer or embedded processor.

The interface board kit is for installation into the Frymaster FRY-1000/1800/2400 model grills. This interface board allows you to connect your existing control box using a cable available from this website.

The ideal interface board kit for gas fryers. This part replaces the brass motor coupling and is required to use our F10251 Interface Board as it replaces a critical part left off that board.

The Frymaster F10251 LLC Interface Board Kit for SMT Gas Models w/ Blower is specifically designed for commercial restaurants that need to reduce energy costs. This option can be installed in select Weber® Spirit and Genesis® II E-210, 3100, 3000, and 3500 cooking systems to save on electricity costs by controlling the blower speed based on the cooking temperature inside your fryer. This kit interfaces with a new control panel (not included) and fits into a standard Spirit II

The Friedmaster LLC Interface Board is an ideal choice for retrofitting electrical compatibility into older Frymaster® grills. The LLC interface board connects to the original logic board of the fryer via two ribbon cables and converts the 240V high voltage signals from the original logic board to lower 120/240V voltages for operation. *Note: This particular kit is designed for select models of Frymaster® commercial series fryers that use a single high voltage hot rail with individual power outlets per zone. Please