INTERMATIC INC. T21004R 60A LOAD CENTER W/T104M TIMER

60A LOAD CENTER W/T104M TIMER

INTERMATIC INC. T21004R 60A LOAD CENTER W/T104M TIMER

The Intermatic T-1-0/415-IB 60A Load Center +/-15 degree With T104M Timer is UL listed for use in a variety of applications. It features ground fault protection, and a thermoplastic over molded case designed to stand up to both indoor and outdoor conditions. It provides protection against electrical fire and personal injury.

The Intermatic T21004R 60A load center includes a t104m timer that monitors the load and controls the time of day associated with power to your over current protected 240V devices. The 240V half hour mechanical timer has six settings in one rotation and can be set for 1/2 hour increments up to 24 hours. Incorporates a stainless steel cover and enclosure; ground bar for safety. Intermatic is committed to providing innovative, value-driven products that make life easier.

The Intermatic T21004R 60A, 120/277-Volt, 6 Breaker, Load Center is a modular circuit breaker. It is used to control and protect electrical circuits. This load center includes 60A circuit breakers and a programmable interval timer with a T104M motor starter module. The heavy duty vinyl weather resistant enclosure for this load center provides protection from the elements for added component security during outdoor installations.

The T21004R is a 60-Amp single-phase grounded load center with electric heat, and one 20A duplex receptacle. It accommodates up to two connected T-103 temperature controllers, one on each of the two bus bars. The optional T104M timer can be mounted to this panel and is factory preset to run off the load side of the bus bar in parallel with up to six connected heating devices. This load center will provide you with all the components you need for heating, lighting, and more!

The T21004R features a single pole 60A, 125VAC overload rated, circuit breaker [T104M] and a removable 5 amp fuse. The built-in transformer provides an isolated neutral for the load center. The MCB [T104M] can be set off by either one or two trip switches installed in the incoming line and connected to the MCB [T104M]. It has 1-5 spaces per circuit breaker which allows you to install up to thirty 15A - 60A branch circuits. Four of the five spaces are adjustable by using an included space and blank fill kit.

The T21004R Load Center is designed for use in residential and light commercial applications. This product is UL listed with operating voltage of 250/120VAC. It has 60A switches, time cycles with adjustable delay, Modular design for adding or removing circuits, and ensures power availability during the specified time intervals.