DPDT CombSystemRelay 24v
This DPDT CombSystemRelay 24v is designed for DPM - 4C-20R0005t & 4C-20R000s power module. It is mainly used in International Comfort Products DPM series products to control the switch at lower electricity voltage (24V, 72V, 108V or more).
International Comfort Products 1000742 DPDT CombSystemRelay 24v
The DPDT CombSystemRelay 24V is an electronic switch. The Combsystem relays combine the functions of two SPDT relays into a single package that can be wired as either a combination or dual relay.
The Comb Systems Relay is a combination wiring and electrical switching device that can be used to connect one or more electrical loads or equipment to two seperate switches, or operate a single load from two seperate switches. Connections are made through the use of standard sets of quick disconnects, which allow the installer to hook up interior lighting or other equipment to a switch, and easily remove it if needed without effecting the connections already installed. The DPDT CombSystem Relay 24v can be used on boats, RVs, automobiles, trucks and much more.
The DPDT CombSystemRelay is a solid state, dual pole double throw relay. The contacts are rated for a maximum of 10 amp at 125 VAC. Contacts are silver alloy and will not tarnish or corrode. Terminals are gold plated to prevent corrosion. N/O SPDT contacts can be connected to an alarm bell, lamp or any other device that will accept a normally open (NO) and normally closed (NC) contact and a resistance of not more than 500 ohms when connected in series with the AC power supply.
The CombSystemRelay (24 V) automatically switches power when a door is opened and switched back when the door is closed. It is equipped with two DPDT relay contacts to switch on/off an appliance or lighting system when a door is used. It can be mounted almost everywhere, according to the installation instructions.
The CombSystemRelays provide electrical isolation of different circuits from each other, also known as a combiner function...