International Comfort Products 1013104 200F M/R Limit Switch

200F M/R Limit Switch

The 200F M/R Limit Switch is designed to replace the OEM limit switches used on 100 and 200 series gas furnaces. Each limit switch features a flange designed for easy installation, with set screws that secure the wires and provides a vibration free connection. The spring loaded design allows for better durability and heat resistance to ensure high performance under extreme conditions.

The 200F M/R Limit Switch is a snap-acting, normally closed limit switch with a rated thermal life of 20,000 cycles. It can be operated manually or from a normally closed circuit. An actuator hookup provides line pressure for operation. When energized, the pilot turns the heater on. Once it reaches 200F the actuator opens and turns off the pilot.

The American Imaginations International Comfort Products 1013104 200F M/R Limit Switch is a Ceiling Mounted Electric Limit Switch for use with Thermostats. It has a 200F degree setting. This unit comes with a 1" (24mm) Diameter MC3 terminal.

The International Comfort Products 1013104 200F M/R Limit Switch is capable of switching 200 amps of AC current. The On, Off, and Alarm position, the Built-in mounting bracket, and the Soldered electrical connections are all designed to ensure long lasting durability. The unit features a Temperature range from 0 deg to 70 deg C (32deg to 158 deg F), Withstands 6kA RMS voltage, Withstands maximum of 600V DC voltage at 6A current, Withstands maximum of 200A at 240V AC current for the MAX period of 1 minute, and has a minimum

The International Comfort Products 1013104 200F M/R Limit Switch is a compatible replacement for a number of limit switches used in HVAC systems. You need to check your existing switch to ensure you are ordering the correct one (including the wiring connections). We can help you find the right limit switch using our chat.

The International Comfort Products 1013104 200F M/R Limit Switch is designed for use on your current line limiter or as a replacement on older units. The LS limit switch comes in an attractive aluminum housing, and the shape of the switch makes it highly visible while in use. This two pole switch will work with a range of 10-180MHz and a maximum load current of 0.01A to 0.5A.

The 200F/M/R limit switch is a line contact normally closed type of limit switch. This device will turn off the heat to your boiler or unit when water temperature falls below 200 degrees Fahrenheit. It will also turn on your heating appliance if the water temperature rises above 250 degrees Fahrenheit.