International Comfort Products 1320367 L220-20F LIMIT SWITCH

L220-20F LIMIT SWITCH

The L220-20F Limit Switch from International Comfort Products is a round, SPST, normally open (NO) switch with 4 pins that is designed to limit the upper position of a motor or compressor. This switch has an operating temperature range of 0 C to 110 C and can be used in many different settings including heating, air conditioning, refrigeration, food service equipment and more.

Our best-selling Limit Switch is designed for any application requiring dependable heat control. Committed to all-around safety, the L220-20F comes with a dual-rated thermal and magnetic trip mechanism, built-in anti-fatigue arms, and easy plug and play capability. With Upstream and Downstream wiring, and an adaptable design, there?s no limit to its versatility. It?s available with 12 or 24 VAC or DC terminals, in various configurations including

Use the L220-20F and L210-20F Magnetically Operated Limit Switches to protect your home's HVAC system from overloaded conditions. These powerful switches respond fast to overload and constant pressure conditions by turning either a contactor or two stage gas valve off, allowing no load on your whole house fan.

Limitation switch set, includes SPST limit switch, attractive molded plastic case with stainless steel cover plate and gasket, white plastic termination cap.

This Limit Switch is perfect for many applications including water heaters, air conditioning, gas appliances, boilers, etc. Use this sw as an emergency cut off sw to allow your system to turn off automatically in the event of a problem. The limit switch makes it easy to troubleshoot problems and helps maintain proper operation of equipment.

This Limit Switch uses a simple toggle switch to detect a presence or absence of a magnetic object. In the ON position, if a ferrous metal (such as steel) approaches within 4mm of the sensing spherical magnet, it will turn the output off. In the OFF state if non magentic material (like plastic) comes within 4mm of the sensing sphere, it will turn on the output. The metal pole of the switch is for external mounting and it will pass up to 0.5

OPERATES TO 65 DEGREES FAHRENHEIT (18 degrees Celsius) To operate this unit, remove the Limit Switch cover screw and use a suitable flat blade screw driver to slide the plastic cam. The switch must be returned to the original closed position when not in use.