ITTJ DIY BUCKET OIL CHANGER 12V ITT JABSCO 17850-1012

ITTJ DIY BUCKET OIL CHANGER 12V

Delighted to offer ITTJ DIY BUCKET OIL CHANGER 12V

After you install your tank and add fluid, you can put it aside and drive around with confidence, knowing that your oil is being changed. No need to go back onto the vehicle. Just grab the blue bucket, unscrew the cap, dip the lift tube into the container and let it rip. It will suck up all of the oil in its way. When finished, simply put it back on the ground, tighten up the cap and clean up spills if necessary. ITTJ DIY BUCKET OIL CHANGER 12V

The 1-Gallon ITTJ DIY Bucket Oil Changer provides a portable and efficient method of changing oil. It is designed for use with the 12 Volt Mityvac Portable Vacuum Pump.

An oil change has never been simpler with the ITTJ DIY Bucket Oil Changer. This system allows you to safely add fluid to your car or truck using the 5 gallon (20 L) bucket that's included. The auto oil drain plug adapter that's included connects to a standard 3/8" hose and is compatible with most automotive and marine fluids. The drain pan that's included fits conveniently into the 5 gallon bucket so you can contain any spillage that may occur without having to worry about it getting dirty.

The ITTJ DIY Bucket Oil Changer is a completely portable oil changer designed to clean your vehicle, motorhome or RV with the least fuss and labour. Crank out the most stubborn of plugs and leaks, change oil in any position or lay back and let the ITTJ Bucket Changer do the rest. The empty bucket design makes it easy to change between different fluids from time to time. Changing grease on your trailer has never been easier!

The ITTJ DIY Bucket Oil Changer makes changing the oil in your boat easy and affordable. This kit contains everything you need to change the oil in a standard size boat, including a 1-4 quart adapter, two extensions for changing through an opening in the bottom of your boat, and six adapters to connect to most types of fittings.

The oil changing bucket will make oil changes easier and quicker. The speed is controlled by a variable speed switch so you can match the speed to the application. This unit is powered by a 17hp pump that can deliver a max of 1200PSI . This unit comes standard with a 1/2" hose barb fitting on the discharge side so that many different sized hoses can be used and clamped/bolted down with the provided steel strap.