JOHNSON CONTROLS 348507 DC TO DC ISOLATOR 24VAC

DC TO DC ISOLATOR 24VAC

The DC to DC Isolator is a solid-state device that accepts an input voltage, rectifies it to produce a pulsed, unidirectional dc output voltage. This device is ac/dc compatible and provides an isolation barrier between the ac and dc circuitry.

-The Johnson Controls 348507 DC to DC Isolator delivers 24VAC from a 12VDC input. -This 12VDC to 24VAC converter is ideal for applications requiring both higher input and output voltages.

The Johnson Controls 348507 DC to DC Isolator 24VAC is an AC/DC power converter module that converts positive and negative DC voltages to a positive 24VAC output. This offers a wide range of control options over AC loads that require isolated control. The Johnson Controls 348508 DC to DC Isolator 48VDC is a similar product for isolated 12VDC outputs.

The Johnson Controls 348507 DC to DC isolator 24VAC is an isolated, DC-to-DC power converter with up to 95% efficiency. It accepts a DC voltage input and produces an output voltage of less than its input over a wide range of input voltages. The circuit accepts an unregulated 24 VDC input and converts it to a regulated 19 VDC output. This converter features over-current protection, short-circuit protection, overtemperature protection, and EMI/RFI filtering for excellent noise immunity.

Johnson Controls 348507 DC TO DC ISOLATOR 24VAC. A better power supply can mean more efficient equipment, lower operating costs and longer component life. Johnson Control's Power Distribution products are specifically designed to improve the power quality of a system, minimize power loss and reduce the load on your facility's switching equipment.

The JOHNSON CONTROLS DC TO DC ISOLATOR 24VAC fits into a 24 volt circuit and helps to isolate the load from ground.

The JOHNSON CONTROLS 348507 DC TO DC ISOLATOR 24VAC is a DC to DC isolator with an input voltage of 24 V AC, an output voltage of 12 V AC and a power rating of 1.5 W.

The Johnson Controls 348507 DC to DC Isolator 24VAC is a circuit board that provides efficient and effective conversion from one voltage to another, isolating the two voltage systems from each other.

The DC to DC Isolator provides multiple isolated power supplies from a single input source. This allows the load to be powered from different voltage sources, or to provide isolated backup power in case of AC line failure.

Johnson Controls 348507 DC to DC Isolator 24VAC. Mounting: DIN rail. Contact type: Micro-switch. NEMA rating: 1, 7, 13, 4X. Class of protection: IP20.