Johnson Controls 541164 GAS SAFETY VALVE-1/2;

GAS SAFETY VALVE-1/2;

GAS SAFETY VALVE-1/2 "B" SIZE, GAS/AIR COMPRESSORS, FOR USE WITH GOGO AIR COMPRESSORS, MODEL NAME : RD-48 330

The Johnson Controls 541164 Gas Safety Valve is designed to stop any leaks of natural gas. This metal body gas safety valve is made of strong cast iron, and is compatible with either 1/2 inch or 3/4 inch gas valves.

Our 541166 replacement Gas Safety Valve is designed to replace the original safety valve that is installed in a gas heater or appliance. The gas safety valve provides a failsafe mechanism to prevent overheating and damage due to no venting of gas from a gas appliance.

This gas safety valve is used by most major manufacturers, and supplies a reliable shut off for natural gas and propane.

The safety valve is intended for use on natural gas or propane gas appliances in commercial and industrial facilities. The valve features include a manual or automatic reset, direct acting or pilot operated. Initiating 2-hand trip mechanism is used to set the initiating point at the desired working pressure. A positive seal is achieved through patented ball retainer design.

A gas safety check valve is designed to prevent the passage of flammable gas or vapors into a home’s plumbing system. Gas services typically pass through the check valve to ensure this safety feature is not circumvented.

Johnson Controls' Manual, Safety Gas Valve provides precise temperature adjustment control in a wide range of gas appliances to avoid excessive heat and risk of fire.

Purpose: Gas Valve for residential and commercial gas boilers and water heaters.

The Johnson Controls 5160N1 Gas Valve has an actuator designed for natural gas. This valve is made of stainless steel.

Bulk Flow Control Valve Gasket Commonly referred to as a G-S Cv, this valve provides precision control of the flow to the appliance. It ranges from reliable pilot reliable/continuous pilot, pilot light & power failure locator, or constant pilot "open" condition.

This Valve is designed for use on gas fired water heaters, the 54 Series Valves are designed for use on gas fired water heaters, they meet or exceed the requirements of AWWA C540. The valves will not be adversely affected by mineral or sea water and do not require pre-heating of either water or the valve. They are certified to CSA Standard B127.1 & ASME 17.11.

The Smarter Way of Remotely Monitoring Your Natural Gas System