JOHNSON CONTROLS 7366 DIN RAIL MTG BRACKET FOR SYSTEM 350; 12" LONG

DIN RAIL MTG BRACKET FOR SYSTEM 350; 12" LONG

TheJOHNSON CONTROLS 7366 DIN RAIL MTG BRACKET FOR SYSTEM 350; 12" LONG has been designed to hold the System 350 300 W x 250 H x 175 D.

INSTALLATION DIN RAIL MTG BRACKET FOR SYSTEM 350; 12" LONG

Johnson Controls 7366 DIN RAIL Mounting Bracket for System 350; 12" long

This item is a DIN rail mounting bracket for System 350 Series Modular Controller products. The 12" long bracket measures 1-1/4" wide. It can be used to mount up to two 350 series Modular Controllers on one DIN rail. It is typically mounted with the attached rails facing up, but may be mounted with the rails facing down if desired. INCLUDES(2) MOUNTING SCREWS THROUGH EACH BRACKET AND 6" LONG FRONT AND 6" LONG REAR SUPPORT RAILS

This is a 12" LC2 Series single-gang mountable aluminum din rail bracket used for attaching the system 350 device to any standard class 2 or 3 nonmetallic enclosure. Mounting holes are spaced 9" center to center.

This is a DIN rail mounting bracket for application with the 350 Series Power Supply Enclosure, specifically System 350-150.

MTG BRACKET FOR SAMPLE SYSTEM 350 CABINETS

Johnson Controls' System 3-5030 is a Din Rail Mounting Bracket that is designed to mount the 350 series Valves.

The JCI Series 350railrail mounting brackets (part number 7366 ) are used with the HVAC System 350High-Voltage Heating & Cooling control panels. The mounting bracket allowsthe System 350control panel to be positioned vertically in a DIN-rail installation.

A DIN rail mounting bracket for the following Thermo King refrigeration systems:

Mounts on standard DIN-Rail

Picture the chiller mounted on a counter or a wall, with 1" or 2" tubing flying across the room to the condenser. Inevitably there is a connection that comes loose, causing air to leak from the system.