Johnson Controls A25CP-1 SPDT HI-LIMIT 25/215F FM APPR.

SPDT HI-LIMIT 25/215F FM APPR.

The Johnson Controls A25CP-1 is a SPDT HI-LIMIT 25/215F FM APPR. that wortks with 35 to 300 Volts systems.

Our Series A25CP-1 2 SPDT HI-LIMIT 25/215F FM APPR miniature circuit breaker featuring Johnson Controls new high energy technology provides high energy efficiency and protection levels. This miniature circuit breaker will handle loads up to 10A, 125VAC at 180m...

Johnson Controls' A25CP-1 SPDT HI-LIMIT 25; 215; FM; APPLICATOR provides economical temperature control of two pipe lines with one switch. Also has extended temperature range down to -15 °F. for freeze protection. Nylon line contact, threaded copper block, and nylon linear actuator are standard features of this valve assembly.

The A25CP-1 is a SPDT 25/215 foreman's master control switch for use with single-, dual-, or three-circuit Johnson Controls Inc. (JCI) heavy industrial or commercial electric thermostat heaters. The switch is designed in accordance with ANSI B30.20, C22.2 No. 39, Canadian Standard Association CAN3-Z24 and British Standard Institution BS5430 rating systems.

The Hi-Limit Switch with Trip Unit is a compact low voltage control device that is typically used to limit the current that is delivered to a heater or other equipment. The SPDT HI-LIMIT QUICK COUPLING has the same exterior configuration as the SPST HI-LIMIT, except it has two spade terminals for field wiring connection. The SPDT Hi-Limit switch offers the user options not available in conventional trip devices.

The A25CP-1 is a spdt hi-limit for use in brake and clutch applications where a metal to metal or metal to soft iron contact is made. It has a maximum current rating of 25A at 15VDC and a minimum current rating of 215mA at 30VDC with a 24VDC control voltage.

A25CP-1 / C25CP / D25CP Mechanical Pressure Switches Check for leakproof hermetic integrity & temperature ratings, pneumatic or hydraulic operation, etc. Use to provide overpressure protection, alarm indication or to shut down a system. Also used as emergency pressure relief valves. Made from Alloyed LeLeadNiCoMo steel for extended service life panel mounting with NEMA 4X enclosure

The A25CP-1 surface mount potentiometer features a limit contact, a highly visible double set of circular red and green marks to indicate the mid-adjust range and a precision D scale.

Built for Industrial, Heavy Duty Applications

The Johnson Controls A25CP-1 2/3-HP NEMA 1 Enclosure Plug-in Variable Speed Drive with Reverse and 25 Amp Switch is a 3 phase variable speed drive that is used in applications such as factory automation and machine tool drives, as well as drives such as fractional horsepower (HP) pump drives. The A25CP-1 features a split case design for easy installation and maintenance, high torque constant voltage operation at wide operating ranges for precise control of induction motor loads, full range forward and reverse operation, externally accessible reversing switch and overload protection. Maximum starting current: 25 Amperes, Maximum

When it comes to safety, you can rely on Johnson Controls. This 1/2 HP motor rotates safely from front to back and side to side, fitting in tight spaces. Fully-enclosed fan-cooled ball bearings increase motor life. Featuring a manual reset thermal overload protector, this option signals an overheated motor.