Johnson Controls C450RCN-3 ResetControlModule2outputSPDT

ResetControlModule2outputSPDT

Johnson Controls C450RCN-3 ResetControlModule2outputSPDT allows you to reset your heating and cooling systems through an easily accessible front-access terminal block. The module comes with a series of LED indicators that will tell you the status of the compressor and outdoor fan motor, and it has a manual test button for system testing.

The C450RCN-3 is a reset control module monitor/override which has 2 output SPDT relay contacts.

The C450RCN-3 is a reset control module for the C-Series fire alarm control panel. The device contains two normally open contacts rated at 6 amps each, two SPDT relays, and one LED indicator light.

The C450RCN-3 is the first 2-input single pushbutton controller of network type. It solves the problem of control high-power power supply with 2 analog input/2 relay output, magnetic contactor without auxiliary relay or contactors, and contactors protection.

Use this part to replace a defective reset module, allowing the equipment to run off of factory programmed settings.

The AC receptacle with reset/control switch is available in single and dual pole configurations. The AC receptacle features non-metallic, thermoplastic enclosure construction and can be configured with male or female terminals. The switch resets the load when the AC supply comes back on and can supply up to 3500 Watts of power

The new Johnson Controls C450RCN-3 model affords the user the ability to reset the HVAC Cycle on some 3-point refrigeration units. The user can do this from a remote place where they have access to power and the controls for this function. To do so, a jumper wire must be applied to a set of terminals, which a qualified technician should be able to complete for you.

Two hot surfaces require two cables. The C450RCN-3 has two 3-wire cables that are held in parallel by a common strain relief. Each cable is 22 AWG with 0.625" (16mm) leads terminated with spade lug-style terminals each rated at 10 amps, 250 volts AC.

The SJC450 is a solid state relay that provides an output that senses and controls solenoid valves or power circuits. The combination of features and price point make SJC450 the ideal choice for applications such as: Automotive and marine fuel charging, Air ride suspension systems, Fuel injection systems, and many others.

For use in the following systems:

With this Johnson Controls module -- that's easy to install, operate and remove -- you can save money each year on your heating and cooling bills. Switching it requires no specialized knowledge, tools or other equipment. The tiny box coordinates itself with your split system air conditioner or heat pump so it turns off, on or cycles air flow based on the time of day and occupancy in the room.