Johnson Controls F261KAH-V01C Flow Switch SPDT Type 3R Nema Encl 1in Npt Conn w/1', 2', 3', & 6' Paddles

FlowSwitch w/SS paddles Nema4

Johnson Controls offers the FlowSwitch in several configurations up to 10 GPM. The FlowSwitch w/SS paddles are for use in liquid applications in air or gas environments. They may be used for gas heating, ventilating, and air-conditioning applications where space is limited. The winged spring design is easy to install and replace. The FlowSwitch has a silver or brass body, and the sprin

The F261KAH-V01C flow switch controls liquid level in a tank and includes options that can be changed by the operator. Such as, selectable paddle sizes and NEMA 4X or IP65 enclosure selected according to user needs. The design of this flow switch is compact for maximum efficiency.

The Johnson Controls F261KAH-V01C Flow Switch SPDT Type 3R Nema Encl 1in Npt Conn w/1', 2', 3', & 6' Paddles switches high fluid flow or level to an electrical signal. Features include a plastic housing and side entry wiring connection on one end, and single-twist terminals on the other end. Control-command features include a single-twist terminal mounting with a Range of 0.5 to 3 GPM

The Johnson Controls F261KAH-V01C Flow Switch SPDT Type 3R Nema Encl 1in Npt Conn w/1', 2', 3', & 6' Paddles is a flow switch that is used for a variety of applications. It requires a GFCI-protected branch circuit with a maximum current of 10A and has a terminal voltage of 120 volts. The maximum flow rate for this item is 1 gallon per minute and the maximum temperature for the device is

10 ft Paddle Assembly The FlowSwitch, has been specifically engineered with the same high-performance technology long trusted by heavy industrial users. This automatic air flow monitor is designed for use in gas duct systems where low gas flow tolerances must be maintained to ensure thermostat supply air heating and cooling output is constant. Designed for use with any application that requires a high level of accuracy, the FlowSwitch can be installed in existing vented residential or commercial heating, ventilating and air conditioning (

The F261KAH-V01C FlowSwitch Range includes wiring accessories and mounting hardware. This FlowSwitch is designed for use as a low level alarm sensor and includes Stainless Steel hardware for harsh chemical environments. It is used with the F268KAH-V01C, F269KAH-V01C, F263KAH-V01C and the F262KAH-V2FK Controllers and Humidistat. It allows the user to monitor flow in heating

The FlowSwitch is a positive shutoff solenoid valve designed to switch on or off upon detection of flow. Flow switches are often used to sense when a specific amount of fluid has been dispensed from a tank. The amount of fluid in the tank can then be used as an input to a control system or application to verify that the intended amount of fluid was dispensed. The F261KAH-V01C FlowSwitch is designed for use with liquids and gases (such as water or