Johnson Controls FTG18A-600R REMOTE SENSING PROBE KIT REMOTE SENSING PROBE KIT

REMOTE SENSING PROBE KIT

FTG18A-600R REMOTE SENSING PROBE KIT

This remote sensing probe kit includes one HART® field device and one FTG18A-600R. The FRX-HDR has a fixed cable length of 15 ft and a maximum cable run of 150 ft when used with the FTG18A-600R. The FTG18A-600R is the slave in this configuration and contains a simple push button and LED indicators to convey status and assist with troubleshooting.

The FTG18A-600R Remote Sensing Probe Kit includes a probe for monitoring temperatures from a safe distance. The all-inclusive kit also includes an 18 foot probe cord, a probe holder, and a magnetic mounting base.

The FTG18A-600R Remote Sensing Probe Kit allows you to control a Johnson Controls thermostat using a remote sensor probe, similar to a traditional wired weatherproof sensor. The kit includes a FTG18A-600W thermostat with sensor probe, JCI840-1 bracket, wires and wire nuts.

The Johnson Controls FTG18A-600R Remote Sensing Probe Kit consisting of the FTG23 sensor with a FTG18-600R sensor probe that extends to 6 feet. Allows access to HVI/HVAC located in unreachable areas according to the user's specifications. It is designed for use with Johnson Controls DLN® Systems.

Johnson Controls' FTG18A-600R remote sensing probe kit provides peace of mind to engineers, contractors and electricians who are concerned about ultrasonic emissions in their plants. The kit includes two probes, one transmitter, one receiver and a remote display unit. Each probe detects changes in temperature from –300 degrees F to 600 degrees F. This allows you to monitor infrared gas emissions from 18 inches away.

With the Johnson Controls FTG18A-600R, you can save time and money with a matching probe kit. The probe delivers precise measurements from an uninterrupted supply of electricity, so you'll have accurate information when you need it.

This kit allows the user to measure temperature without disturbing the process or product being monitored. It is an excellent tool for plant managers confirmation on plant performance, isolating problems with production lines, monitoring fermentation tanks, product storage rooms, and lagering vessels. Its quick connect system allows for easy installation on virtually any probe type.

QUICK ORDER PACKAGE 22T WITH TRANSMISSION AND CONDENSER.

A Johnson Controls® ftG® Probe reduces installation time and eliminates errors. This easy-to-program and use system allows the user to adjust and verify probe and transmitter settings without powering on the system. Each of these systems includes:

The Johnson Controls FTG18A-600R is a probe that can be mounted on various Johnson thermostats to sense and display temperature and energy usage. The FTG18A-600R is for use with the following thermostats: EnVision™ TH6000, EnVision™ TH8000, and the FocusPRO™ Series.

The Johnson Controls FTG18A-600R is designed to be connected to the remote sensor cable (located on the 18000 Series furnaces) and then connected to an external transmitter (remote sensor module) for remote display monitoring.