Johnson Controls HE69130NP0 DUCT MNT. HUMIDITY X-MTR

DUCT MNT. HUMIDITY X-MTR

This DUCT MNT. HUMIDITY X-MTR is in great condition with no issues noted.

The Johnson Controls HE69130NP0 DUCT MNT. HUMIDITY X-MTR monitors heat, humidity, and air flow in ducted heating, ventilation or air conditioning systems during start-up and shutdown processes. The device measures the temperature of the process gas, dry bulb temperature of the return air, percent relative humidity of the process gas, dewpoint of the air entering system (dry bulb), dewpoint of the air leaving system (cooling cycle) or de-dusting cycle, air flow in/out cfm, and it also calculates important operational parameters such as wet bulb temperature at

Control the humidity of your air easily with this X-MTR humidity controller. The humidity controller, which mounts on a wall or on the floor, is designed to control the humidity in small spaces. A four-wire cable connects the indoor sensor assembly to the display unit. The outdoor sensor assembly requires an optional conduit that is not included with the controller. The display shows setpoint humidity level, current room dry bulb temperature, current room wet bulb temperature, room RH% and ambient dry bulb temperature.

The Duct Mount Humidifier Kit, when used with an additional power outlet, allows you to add humidity in heated and cooled spaces such as entrance halls, basements and garages.

Johnson Controls duct mounted humidity meter with probe measures both relative and specific humidity with a high accuracy of +/-2% RH, using a new TSI Sencore Sencor A5X2N probe. It is the ideal choice for monitoring humidity in HVAC applications, clean rooms, laboratories, large data centers, warehouses and industrial facilities

HIGHEST QUALITY FACTORY SEALED X-METER WITH A WHOLE NEW DESIGN

The X-Humidity systems allows you to install one unit in a remote location and another in your building's HVAC equipment room. Each remote sensor monitors the humidity level of its area, and reports it back to the control unit via radio frequency for continuous monitoring. This provides you with precise humidification control that's never been possible before.

Apply this sensor to a duct, such as a hood or register with an external air source and make sure the HVAC system is maintaining proper relative humidity levels in occupied spaces. This sensor can be applied vertically or horizontally.

Johnson Controls HE69130NP0 Full Console Humidity Instrument

This unit is developed for additional climate control in commercial buildings with difficult installations. It can be installed either on central or local HVAC systems without requiring any new wiring. It peripherally humidifies the air and adds extra cooling, while simultaneously dehumidifying the air in summer.

The Johnson Controls HE69130NP0 Humidifier Maintenance Kit works with Climate Zone 4 and 5 set point humidifiers to help prevent mold and mildew. This kit includes a digital humidistat to make sure your humidity levels are within an ideal range and a filter to prevent dirt and debris from entering your system and prolong your humidifier's life. Invest in your family's comfort and order this Johnson Controls maintenance kit today.

Areas of use: Light commercial applications