Johnson Controls LVR27A-600 , Inc. Crank Arm Adj. Radius 3/4 To 2-7/8

"DAMPER CRANKARM

The "DAMPER CRANKARM" is a replacement damper crankarm for some Honeywell / Johnson Controls valves. It is available in 3/4". This part is made of the original material, steel.

A vital component of an air-conditioning system, the damper crankarm is the part that controls the flow of air through ducts. It relies on a rotating mechanism to open or close an aperture in the ductwork, allowing the desired temperature of air into homes and businesses. This damper crankarm operates at 3/4 inch increments, extending from 2 7/8 inches to 7 13/16 inches in diameter, with a height range of 9 1/2 inches to 13 3/4 inches.

The LVR25A-600 damper crankarm is designed for select 2-pipe units. This control damper crankarm (crank arm) is used to adjust the primary dampers on outdoor units. It has an adjustable radius of 3/4 to 2-7/8 inches, and operates off three friction points. This Johnson Controls part is the damper crankarm only, which must be used with the actuator (sold separately).

The Johnson Controls LVR27A-600, Inc. Crank arm is a part of the damping mechanism in gas and oil shock absorbers. This damper crankarm is specifically designed for use with the 550 Series Gas Shock

The crank arm is constructed of polished stainless steel with serrations to facilitate connection to damper shaft.

The Johnson Controls LVR27A-600 Inc. Damper Crank Arm is designed to be used with the LVR Series of Infant Incubators.

With a larger diameter disc, the Jammer series provides more air volume for a cooler running system. This crank arm features a bright red finish and EZ Dial knob that allows easy access to gain quicker performance for today's late model cars.

Bearing centerline to base centerline = 1.922"

Radius 3/4"-2 7/8"

Quiet and easy to slide, these single-door packing systems make travel simple.

The LVR27A-600 series actuators are used to provide up/down or linear actuation by applying control pressure to the actuator. The LVR27A-600 series actuators are small air cylinders, designed to fit into tight spaces which requires an actuating stroke less than 3" and 7/8" tubing I.D. The LVR27A-600 series is a rod end cylinder, utilizing a single rod that provides the force on the piston for up / down operation. A lever associated with the cylinder rod transmits linear force on the rod end, instead of attempting to utilize a linear

Hoseway HFC/FW series of holding tank deodorizers are automatic, floating, self-contained units designed to treat sewage waste within portable restrooms, mobile homes, RVs and boats. The holding tank deodorizer is an economical alternative to replacing or repairing improperly functioning holding tank systems. To prevent further waste of water and other fluids, waste tanks containing odors may be treated upon inspection.