Johnson Controls M9203-GGA-2 Proportional Actuator, 27 Torque

24v Proportional 150s SR Act

The M9203GGA-2 is the battery-powered version of the 27 Torque 150s SR Actuator. This actuator provides precise control over hydraulic valve position and system flow rate. The unique 2:1 mechanical advantage means this actuator can control 3x (four valves - 1 handle) with just one handle stroke.

The JCI M9203-GGA-2, Proportional Valve Actuator, 150 s Minimum Stroke is a proportional valve actuator designed for use with small commercial refrigeration and a/c units. This a/c evaporator valve actuator will maintain constant vacuum to the evaporator coil while allowing for free airflow.

Proportional Actuator, 27 Torque

Johnson Controls' Proportional Actuator is designed for use in Solar Positioning Systems, remote switched lighting circuits, and Automatic Temperature control. The M9203-GGA-2 has an adjustable torque rating of 27 in.-lbs. to 169 in.-lbs., with 300-0.250 in./sec maximum acceleration/deceleration rate. This actuator can handle at least 100,000 actuations without internal wear or measurable degradation of movement.

Johnson Controls M9203-GGA-2 Proportional Actuator, 27 Torque, 3000 PSI Pressure.

The Johnson Controls M9203-GGA-2 Proportional Actuator is an adaptive flow control solution that offers precise control of flow volume and inventory level. This proportional actuator has an injection volume range of 150 sccm to 2,300 sccm. The actuator has a life cycle of 40,000 actuations, constant force of 0.8 kgf, and torque up to 600 Ncm.

The Proportional Actuator is a proportional multi-range actuator. The M9203-GGA-2 is a 2 stage torque setting device intended for use with position feedback systems to control a motor or other equipment. This device is a solid shaft output actuator. It has the ability to set a voltage, a reset value and a potentiometer value as well as a timed reset feature.

The M9203-GGA-2 Proportional Actuator, 27 Torque® is a proportional damping valve with one linear and one rotary output. With the capability of two separate outputs, also known as "dual control", this unit can be used as a proportional damper or as a positioner. This is accomplished by using the Gain input to adjust the amount of damping and using either brake input to select the relative positioner.

The M9203-GGA-2 Proportional Actuator has 50 output shaft rpm and 134 inch pounds of torque. The Johnson Controls (cont) (cont) (cont) (cont) (cont) (cont) M9203-GGA-2 Proportional Actuator weighs 13.50 lbs and has a diameter of 18.00 inches.

Diaphragm-type air valves are designed for pneumatic control of solenoid-operated proportional control valves, proportional directional control valves, and pneumatic control panels. They can be used for control functions or as limit switches to perform various cycle functions.

Johnson Controls' M9203-GGA-2 Proportional Actuator, 27 Torque is designed for roof jacks in small to moderate sized commercial vehicles. It is intended for applications that require positioning long stroke off-center loads in a chassis. This adjustable rotary actuator is made up of five parts: terminal blocks, mounting strap, gear housing, gear assembly, and output shaft. The shaft has insertable pins that are the basis for the adjustment in output rotation direction. The M9203-GGA-2 is constructed with carbon steel components in accordance with SAE J514 code requirements.

The M9203-GGA-2 propto valve is a proportional actuator with 27 ft-lbs max torque. It is designed to protect internal components from external shock caused by rapid valve closure or impact, while maintaining constant pressure. Mounting Style - Floating.