Johnson Controls P100AP-105 30#Opn 60#Cls SPST-Auto PrsSwt

30#Opn 60#Cls SPST-Auto PrsSwt

Johnson controls P100AP-105 30#Opn 60#Cls SPST-Auto PrsSwt

The Johnson Controls P100AP-105 30#Opn 60#Cls SPST-Auto PrsSwt is a bay type air valve that features a sure bay, manual override. The air receiver drier has been eliminated from the design. This product meets all of the standards set by UL and CSA which ensures safety as well as reliability.

The Johnson Controls P100AP-105 30#Opn 60#Cls SPST-Auto PrsSwt module is designed to control pressure within a heating, ventilating, and air conditioning system. The control provides integral contacts, double break contacts on both normally open and normally closed circuits. This unit is enclosed in a NEMA 4X enclosure.

60#Cls SPST-Auto PrsSwt

The Johnson Controls P100AP-105 30#Open 60#Closed SPST-Auto Pressure Switch is a pressure switch that activates automatically to stop air-flow when the pressure drops to approximately 100 PSI on low side. Ideal for use with gas, propane, solvent, and gravity conveying applications.

The Johnson Controls P100AP-105 Programmable Auto Changeover Switch is uniquely suited for solar and off-grid applications where night and day operation is required. The open-collector SPST-Auto PrsSwt can operate in both unipolar and bipolar switching configurations, and it includes a 10kA, Class C SPDT relay in the SCR input's output line to provide upward fault protection.

The P100AP-105 is a 30 pound open, 60 pound close precision that is a versatile, general purpose switch for computer and electronics applications.

The P100AP-105 Johnson Controls combo switch is a SPST-only, momentary opentrigger with a 1 to 15 amp capacity. This product has a rated interrupting residual current (AICr) and interrupting rating (AR) of 30A@240VAC and 60A@120VAC and it is suitable for use in environments where water or moisture may be present.

Our 30#Amp, Single Pole, Brass Plated Contactor has a Open and Close rating of 30 Amp and a 600 Volt rating and is Brass Plated for corrosion resistance. It has a wide visual indicator with a translucent body for easy inspection.

The Johnson Controls P100AP-105 100A Panel is a Manual Transfer Switch for single phase applications with built in overload protection. This is a NEMA 1 enclosure rated to outdoor use, features screw terminal connections and is available with optional internal wiring.

Designed to meet needs for different control levels where momentary, automatic or manual operation is desired, the P100D Series is sized to accommodate most switches. Whether a customer just needs a single switch for a remote starter or a builder wants a quick way to include door controls in a wall panel, the P100D Series may be just what they're looking for.

The product is a small automatic centrifugal fan with motor rated at 60 CFM. It has direction setting for North, South, East and West four blades without leaving them open or closed. The product is absolutely maintenance free, completely enclosed on all sides, totally weather proofed. The blades are made of galvanized steel sheet with plastic blades guards installed to prevent injury to personnel on site.